Installation; Technical Specifications - Lincoln Electric DH-10 Operator's Manual

A-1
TECHNICAL SPECIFICATIONS –DH-10 Complete Units or Controls & Heads
The K1499-5 DH-10 consists of a control and a double head 10 series wire drive assembly premounted
on a platform with two 2" O.D. spindle mountings. Specifications for the units follow:
SPEC.# TYPE INPUT POWER
K1499-5 Double Head 40-42 Vac + 10%
Control Bench Model 6.0 Amps 50/60 Hz (520.7 mm)
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
SPEC.# TYPE
DH-10 35-500 IPM
Left Head (0.89-12.7 m/m)
K1499-5
DH-10 55 - 825 IPM
Right Head (1.40 - 21.0 m/m)
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.

INSTALLATION

CONTROLS SECTION OF COMPLETE UNITS
Dimensions
Height
20.50 " 19.75 "
(501.7 mm)
WIRE DRIVE SPECIFICATIONS FOR COMPLETE UNITS•
LOW SPEED RATIO
Wire Size
Speed Solid
.025 - 3/32 in.
(0.6 - 2.4 mm)
.025 - 1/16 in.
(0.6 - 1.6 mm)
PHYSICAL SIZE•
Width Depth Weight
31.50 " 95.0 Lbs
(800.1 mm) (43.1 Kg)
Cored Speed
.030 - .120 in 50 - 750 IPM
(0.8 - 3.0 mm) (1.25 - 19.0 m/m)
.030 - 5/64 in. 80 - 1250 IPM
(0.8 - 2.0 mm) (2.00 - 31.8 m/m)
DH-10
TEMPERATURE RATING
Operating Storage
+40°C to +40°C to
-20°C -40°C
HIGH SPEED RATIO
Wire Size
Solid Cored
.025 - 1/16 in. .030 - 5/64 in.
(0.6 - 1.6 mm) (0.8 - 2.0 mm)
.025 - .045 in. .030 - .045 in.
(0.6 - 1.2 mm) (0.8 - 1.2 mm)
A-1