Lincoln Electric DH-10 Operator's Manual page 30

C-3
K1500-2 for Magnum 200/300/400 gun with K466-10 con-
nection kit. (Also Tweco 4).
K1500-3 for Magnum 550 gun with K613-7 connection.
(Also Tweco 5).
K1500-4 (Miller Connection) for any gun having a
newer style miller connection. Install gun adapters
per the instructions shipped with the unit.
K1500-5 OXO gun receiver bushing.
GUN AND CABLE ASSEMBLIES
The following Lincoln gun and cable assemblies are com-
patible with DH Wire Feed heads with appropriate K1500
Gun Adapter:
K126 (Requires K1500-1) Innershield gun and cable
assemblies are rated at 350 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K115 (Requires K1500-1) Innershield gun and cable
assemblies are rated at 450 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K470 (With K466-9 requires K1500-2) Magnum 300
GMAW gun and cable assemblies are rated 300 amps,
60% duty cycle. (Consult sales specifications for appropri-
ate models)
K471 (With K466-9 requires K1500-2) Magnum 400
GMAW gun and cable assemblies are rated 400 amps,
60% duty cycle. (Consult sales specifications for appropri-
ate models)
K497 (With K466-9 requires K1500-2) Magnum 200
GMAW gun and cable assemblies are rated 200 amps,
60% duty cycle. (Consult sales specifications for appropri-
ate models)
K541 (With K466-9 requires K1500-2) Magnum 400 Short
Neck GMAW gun and cable assemblies are rated 400
amps, 60% duty cycle. (Consult sales specifications for
appropriate models)
K598 (With K613-7 requires K1500-3) Magnum 550
GMAW gun and cable assemblies are rated 550 amps,
60% duty cycle. (Consult sales specifications for appropri-
ate models)
The following Lincoln gun and cable assemblies are
equipped with a Fast-Mate™ connector. They can be used
with DH wire feed models by installing a K489-9 Adapter, or
a K489-10 Fast-Mate™ adapter kit and a K1500-1 Lincoln
Gun adapter.
K684 Magnum "Super Cool" FM water cooled GMAW gun
and cable assemblies are rated 450 amps, 100% duty
cycle (CO ). (Consult sales specifications for appropriate
2
models)
ACCESSORIES
K498 Magnum 200 FM GMAW gun and cable assemblies
are rated for 200 amps 60% duty cycle. (Consult sales
specifications for appropriate models)
K534 Magnum 250L FM GMAW gun and cable assemblies
are rated for 250 amps, 30% duty cycle. (Consult sales
specifications for appropriate models)
K478 Magnum 300 FM GMAW gun and cable assemblies
are rated for 300 amps, 60% duty cycle. (Consult sales
specifications for appropriate models)
K479 Magnum 400 FM GMAW gun and cable assemblies
are rated for 400 amps, 60% duty cycle. (Consult sales
specifications for appropriate models)
K1558-1 Remote Switch Interface Module, the Remote
Switch Interface Module can be used with the DH-10 Double
Header wire feeder models, using G3041-2 (or higher)
Control Boards.
The module provides for user interface connection of an
external switch (flow switch, ect.) which must be closed to
enable the feeder welding operation. Also, the Module pro-
vides for interface connection of external equipment (fume
extractor, ect.) to the Moduleʼs isolated relay contacts which
actuate when the feeder welding gas solenoid is activated
(representing welding operation in progress).
When used with the DH-10 Double Head feeder, this one
Module provides these input and output switch function con-
nections independently for each head operation.
This module is necessary when using the K1536-1 water
flow sense kit with the DH-10.
DH-10
C-3