Satel Proof-TR489 User Manual
  1. Manuals
  2. Brands
  3. Satel Manuals
  4. Radio Modems
  5. Proof-TR489
  6. User manual

Satel Proof-TR489 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SATEL Proof-TR4+/R4+/TR9/TR489
User Guide, Version 3.0
SATEL Proof-TR489
SATEL Proof-TR4+
SATEL Proof-TR9
SATEL Proof-R4+
Radio Modem
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Proof-TR489 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Satel Proof-TR489

Summary of Contents for Satel Proof-TR489

  • Page 1 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 SATEL Proof-TR489 SATEL Proof-TR4+ SATEL Proof-TR9 SATEL Proof-R4+ Radio Modem User Guide...

  • Page 2: Table Of Contents

    IMPORTANT NOTICE ..................4 RESTRICTIONS ON USE – SATEL PROOF-TR4+/R4+ .......... 5 RESTRICTIONS ON USE – SATEL PROOF-TR9 ............ 6 RESTRICTIONS ON USE – SATEL PROOF-TR489 ..........8 PRODUCT CONFORMITY .................. 11 WARRANTY AND SAFETY INSTRUCTIONS ............12 DESCRIPTION OF THE PRODUCT ............. 13 SATEL PROOF-TR4+/R4+ TECHNICAL SPECIFICATIONS ......
  • Page 3 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 Radio state ................... 34 Priority RX/TX ..................34 Forward Error Correction (FEC) ............35 Error checking ..................35 TX delay....................36 Add RSSI to data .................. 36 9.10 Separate RX/TX-frequencies ..............36 9.11 Call Sign ....................36 9.12...

  • Page 4: Important Notice

    User Guide, Version 3.0 IMPORTANT NOTICE All rights to this manual are owned solely by SATEL Oy (referred to in this user guide as SATEL). All rights reserved. The copying of this manual (without the written permission from the owner)

  • Page 5: Restrictions On Use - Satel Proof-Tr4+/R4

    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SATEL Proof-TR4+/R4+ are allowed to be used in the following countries, either on license free channels or on channels where the operation requires a license. More detailed information is available at the local frequency management authority.

  • Page 6: Restrictions On Use - Satel Proof-Tr9

    The frequency band in USA and Canada is 902 – 928 MHz. In Australia and Brazil the frequency band is limited to 915 – 928 MHz due to the local regulations. SATEL provides the specific product variants that are configured for the specific regions.
  • Page 7 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type Manufacturer Antenna model Maximum gain (dBi) Omnidirectional Oy CompleTech Ltd CA915H Directional (yagi)

  • Page 8: Restrictions On Use - Satel Proof-Tr489

    Restrictions on use - 403-473 MHz frequency band: SATEL Proof-TR489 radio modems (on 403-473 MHz band) are allowed to be used in the following countries, either on license free channels or on channels where the operation requires a license.
  • Page 9 Separation distance [cm] Restrictions on use – 869.4-869.65 MHz frequency band: SATEL Proof-TR489 radio modems (on 869.4-869.65 MHz band) are allowed to be used in the following countries, either on license free channels or on channels where the operation requires a license.
  • Page 10 The frequency band in USA and Canada is 902 – 928 MHz. In Australia and Brazil the frequency band is limited to 915 – 928 MHz due to the local regulations. SATEL provides the specific product variants that are configured for the specific regions.

  • Page 11: Product Conformity

    User Guide, Version 3.0 PRODUCT CONFORMITY Under the sole responsibility of manufacturer SATEL Oy declares that SATEL Proof-TR4+, SATEL Proof-R4+, SATEL Proof-TR489 radio modems are in compliance with the essential requirements (radio performance, electromagnetic compatibility and electrical safety) and other relevant provisions of Directives 2014/53/EU and 2011/65/EU and Council recommendation 1999/519/EC.

  • Page 12: Warranty And Safety Instructions

    -The radio modem is only to be operated at frequencies allocated by local authorities, and without exceeding the given maximum allowed output power ratings. SATEL and its distributors are not responsible, if any products manufactured by it are used in unlawful ways.

  • Page 13: Description Of The Product

    User Guide, Version 3.0 1 DESCRIPTION OF THE PRODUCT SATEL Proof radio modems are UHF radio transceivers that provide a transparent data link with many SATEL serial radios and with many other manufacturers’ radio modems. • SATEL Proof-TR4+ supports 403…473 MHz frequency band •...

  • Page 14: Satel Proof-Tr4+/R4+ Technical Specifications

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 2 SATEL Proof-TR4+/R4+ TECHNICAL SPECIFICATIONS SATEL Proof-TR4+/R4+ comply with the following international standards: • EN 300 113 (radio) • EN 301 489-1, EN 301 489-5 (EMC) • IEC 62368-1 (safety) • FCC CFR47 Part 90 (radio) •...
  • Page 15 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 8 dB @ 25 kHz SATEL-4FSK (FEC ON) 8 dB @ 12.5 kHz 10 dB @ 25 kHz CO-Channel Rejection SATEL-8FSK (FEC ON) 11 dB @ 12.5 kHz 21 dB @ 25 kHz SATEL-16FSK (FEC ON) 20 dB @ 12.5 kHz...
  • Page 16 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 Housing Die cast aluminium enclosure Size L x W x H 174 x 95 x 46 mm IEC60068-2-32, Mechanical standards ISO9022-36-08, ISO9022-31-06, ISO9022-33-06 Weight <500 g See Note 1 below IP rating IP67 / IP69K...

  • Page 17: Satel Proof-Tr9 Technical Specifications

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 3 SATEL Proof-TR9 TECHNICAL SPECIFICATIONS SATEL Proof-TR9 complies with the following international standards: • FCC CFR47 Part 15 (EMC) • IC RSS-247, ICC RSS-Gen, ICES-003 SATEL Proof-TR9 TECHNICAL SPECIFICATIONS Frequency Range 902-928 MHz Spreading Method...

  • Page 18: Satel Proof-Tr489 Technical Specifications

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 4 SATEL Proof-TR489 TECHNICAL SPECIFICATIONS SATEL Proof-TR489 complies with the following international standards: • EN 300 113 (403-473 MHz frequency band) • EN 300 220-1, EN 300 220-2 (869.4-869.65 MHz frequency band) • EN 301 489-1, EN 301 489-5 (EMC) •...
  • Page 19 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 60 dB @ 12.5 kHz 8 dB @ 25 kHz SATEL-4FSK (FEC ON) 11 dB @ 12.5 kHz CO-Channel Rejection 10 dB @ 25 kHz SATEL-8FSK (FEC ON) 11 dB @ 12.5 kHz 21 dB @ 25 kHz SATEL-16FSK (FEC ON) 20 dB @ 12.5 kHz...
  • Page 20 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 SATEL Proof-TR489 TECHNICAL SPECIFICATIONS on 869.4-869.65 MHz Parameter RECEIVER TRANSMITTER Notes as defined by Frequency Range 869.4 ... 869.65 MHz CEPT/ERC/REC 70-03 Tuning range 0.25 MHz Minimum RF Frequency 6.25 kHz Step Channel Spacing...
  • Page 21 Typical Power Consumption TX 4.5 W (12 V) @ 1 W transmitter power Values are subject to change without a notice. SATEL Proof-TR489 TECHNICAL SPECIFICATIONS (characteristics common to all frequency bands) Parameter Serial Data Interface RS-232 asynchronous data 4800 – 115200 bps Operating Voltage +7 …...

  • Page 22: Configuration

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 5 CONFIGURATION The configuration of SATEL Proof radio modem can be modified via the serial interface by using SATEL Configuration Manager software or specific SL commands. 5.1 Configuration Manager software This easy-to-use software for Windows provides access to the user settings, including the channel list editor for creating the channel lists, and the functions for restoring the factory setup and making firmware updates.

  • Page 23: Commands

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 5.2 SL commands A terminal device can command or configure the radio modem via the serial data interface by using SL commands (similar to AT commands in traditional wired modems) that are applicable especially in cases where radio modems are to be integrated seamlessly inside a system behind the integrator’s own user interface.
  • Page 24 ("OK" or "ERROR") of the proceeding command. In addition, it is recommended to implement a timeout to the terminal software for recovering the case when no response is received from the radio modem. SL commands are described in separate documentation, contact SATEL for more information.

  • Page 25: Modem Settings

    PacCrest-4FSK (Available set depends on PacCrest-GMSK the factory configuration) PacCrest-FST TrimTalk450s(P) TrimTalk450s(T) SATELLINE-2ASxE SOUTH SATEL-8FSK-1 (FEC OFF) SATEL-8FSK-2 (FEC ON) SATEL-16FSK-1 (FEC ON) RX Address Enabled ON/OFF TX Address Enabled ON/OFF FEC Mode ON/OFF (applies only to SATELLINE-3AS radio compatibility mode)
  • Page 26 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 RADIO SETTINGS (these settings apply to 869.4-869.65 MHz frequency band) Setting Default value Range of values TX frequency 869.41250 MHz 869.41250 - 869.63750 MHz RX frequency 869.41250 MHz 869.41250 - 869.63750 MHz Reference Frequency 869.000 MHz...
  • Page 27 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 RADIO SETTINGS (these settings apply to 902-928 MHz frequency band) Operation Mode Setting Default value Range of values Modem mode Point-to-Point Slave Point-to-Multipoint Master Point-to-Multipoint Slave Point-to- Point-to-Point Slave/Repeater Multipoint Slave Point-to-Point Repeater Point-to-Multipoint Repeater...
  • Page 28 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 SERIAL PORT RELATED SETTINGS Setting Default value Range Data speed 115200 bps 4800 – 115200 bps Data bits Parity bits None None, Even, Odd Stop bits Pause length 3 bytes 3….255 SL-commands ON/OFF Power Save Mode...

  • Page 29: Connectors

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 7 CONNECTORS 7.1 Antenna connector All models have a single TNC female type antenna connector with impedance of 50 Ohm. The antenna should always be connected when the power is on. 7.2 Power/Data connector...

  • Page 30: Serial Port

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 8 SERIAL PORT The radio modem is referred to as DCE (Data Communication Equipment) whereas the device connected to it, typically a PLC or a PC, is referred to as DTE (Data Terminal Equipment).

  • Page 31: Data Buffering

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 8.2 Data buffering Whenever the radio modem is in Data Transfer Mode it monitors both the radio channel and the serial interface. When the terminal device starts data transmission the radio modem switches to transmission mode.

  • Page 32: Rf Interface

    User Guide, Version 3.0 9 RF INTERFACE NOTE! This chapter refers to products using 403-473 MHz frequency band, please contact SATEL for more details concerning 900 MHz frequency band. All SATEL Proof radio modems have a female TNC antenna connector (50 Ohm impedance).

  • Page 33: Receiver

    The setting and/or using of non-approved power levels may lead to prosecution. SATEL and its distributors are not responsible for any illegal use of its radio equipment, and are not responsible in any way of any claims or penalties arising from the operation of its radio equipment in ways contradictory to local regulations and/or requirements and/or laws.

  • Page 34: Radio State

    It is not possible to update/change the models NOT supporting the encryption to support this feature in the field. This task can be executed is SATEL factory premises and will be charged according to the service price list. The factory default value for the encryption feature is OFF state.

  • Page 35: Forward Error Correction (Fec)

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 output data. Should reception be in progress, the radio modem will stop it and change to a transmit state. There is no need to use any handshaking for the control of timing. Priority RX means, that a radio modem tries to receive all data currently in the air. If a terminal device outputs data to be transmitted (or an SL command) it will be buffered.

  • Page 36: Tx Delay

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 9.8 TX delay The transceiver can be configured to delay the beginning of a radio transmission by 1...65000 ms. The function can be used to prevent packet contention in a system, where all substations would otherwise answer a poll of a base-station simultaneously.

  • Page 37: Channel List

    • Transmitter power level (optional) Additionally, the default channel that the radio modem uses after a reset is defined. Channel lists can be created and utilized by using either SATEL Configuration Manager Software or SL commands. SATEL Configuration Manager software provide a channel list editor (snapshot below) for creating and saving a channel list in the radio modem, or in a file for later usage.
  • Page 38 Please contact SATEL for more information of Repeater- and Addressing –features.

  • Page 39: Radio Compatibility Modes

    9.14 Radio compatibility modes SATEL Proof-TR4+/R4+/TR489 (on 403-473 MHz frequency band) provide the following radio compatibility options: • SATEL 3AS (option 0) original SATEL 4FSK data transfer mode (default) • SATEL-8FSK-1 (option 20) 8-FSK/FEC OFF • SATEL-8FSK-2 (option 21) 8-FSK/FEC ON •...
  • Page 40 Remote Address of a Pacific Crest transmitter (or if the message has the broadcast address 255). SATELLINE modems must have the following key settings: • FEC OFF (because the FEC here means SATEL 3AS FEC, not Pacific Crest/TRIMTALK FEC) • Error check OFF • Error Check mode OFF •...
  • Page 41 Pacific Crest Local/Remote addresses are supported in the firmware versions starting from v3.46.3 Error check and Full CRC16 check must be OFF in SATEL modem Message Routing is not supported by Pacific Crest radios SATEL RX/TX addressing does not use ARQ scheme like Pacific Crest radios.
  • Page 42 Local address in Pacific Crest PDL modems. The default value is 0x0000 (0 in decimal format). SATEL modem needs to have TX Delay 50ms or more in order to avoid messages from colliding in case it is to be placed in a Pacific Crest system that uses addressing and acknowledging scheme.

  • Page 43: Mechanical Dimensions

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 10 MECHANICAL DIMENSIONS The device dimensions in millimetres.

  • Page 44: Installation

    User Guide, Version 3.0 11 INSTALLATION SATEL Proof radio can be installed to any position from its 4 screw attachment points with maximum of M5 bolts/screws. SATEL Proof is waterproof fulfilling IP67 and IP69K specifications. Note that the antenna must be installed properly and Deutsch DT connector cable counterpart must have a gasket installed to properly seal the connection in order to reach the IP ratings.

  • Page 45: Grounding

    User Guide, Version 3.0 12 GROUNDING SATEL Proof radio modems are equipped with a grounding terminal, as shown below. It is recommended to connect a ground wire from the grounding terminal to the earth ground and that all other interconnected devices share the same electrical ground potential.

  • Page 46: Accessories

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 13 ACCESSORIES SATEL provides a wide selection of accessories and solutions for its radio modems. • Antennas • Serial data/Power cables and adapters • RF-cables • Filters and lightning protectors • Power supplies • Enclosures Please visit www.satel.com...

  • Page 47: Proposals For More Reliable Radio Link

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 14 PROPOSALS FOR MORE RELIABLE RADIO LINK In case where the environment is challenging the following methods can be used for improving the transmission reliability: • Forward Error Correction, FEC, is recommended in challenging environment like urban areas.

  • Page 48: Appendix A - Transmission Delays

    SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 15 APPENDIX A – TRANSMISSION DELAYS The tables on the next page present the transmission delays vs. the size of the message to be transmitted. The values are in 10% margin. The delays are measured from the end of transmission to the end of reception on the serial interface as shown below.
  • Page 49 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 SATELLINE-3AS mode (FEC ON) on 25 kHz channel - Transfer delays 1 byte 10 bytes 100 bytes 500 bytes 1200 35 ms 34 ms 29 ms 30 ms 4800 28 ms 28ms 27 ms...
  • Page 50 SATEL Proof-TR4+/R4+/TR9/TR489 User Guide, Version 3.0 Pacific Crest GMSK mode on 12.5 kHz channel - Transfer delays 1 byte 10 bytes 100 bytes 500 bytes 9600 93 ms 101 ms 445 ms 2011 ms 19200 91 ms 97 ms 393 ms...

This manual is also suitable for:

Proof-tr4+Proof-tr9Proof-r4+

Table of Contents