Satel SATELLINE-3AS VHF YM5000 User Manual

Satel SATELLINE-3AS VHF YM5000 User Manual

Satelline series
Hide thumbs Also See for SATELLINE-3AS VHF YM5000:
Table of Contents

Advertisement

IMPORTANT NOTICE

All rights to this manual are owned solely by SATEL OY (referred to in this user
guide as SATEL). All rights reserved. The copying of this manual (without the written
permission from the owner) by printing, copying, recording or by any other means,
or the full or partial translation of the manual to any other language, including all
programming languages, using any electrical, mechanical, magnetic, optical,
manual or other methods or devices is forbidden.
SATEL reserves the right to change the technical specifications or functions of its
products, or to discontinue the manufacture of any of its products or to discontinue
the support of any of its products, without any written announcement and urges its
customers to ensure, that the information at their disposal is valid.
SATEL software and programs are delivered "as is". The manufacturer does not
grant any kind of warranty including guarantees on suitability and applicability to a
certain application. Under no circumstances is the manufacturer or the developer
of a program responsible for any possible damages caused by the use of a
program. The names of the programs as well as all copyrights relating to the
programs are the sole property of SATEL. Any transfer, licensing to a third party,
leasing, renting, transportation, copying, editing, translating, modifying into
another programming language or reverse engineering for any intent is forbidden
without the written consent of SATEL.
SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED
TO BE USED IN ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED
FUNCTION NOR AS A PART OF ANY OTHER CRITICAL SYSTEM AND ARE
GRANTED NO FUNCTIONAL WARRANTY IF THEY ARE USED IN ANY OF THE
APPLICATIONS MENTIONED.
Salo, Finland 2015
NOTE! This is a short form user guide for SATEL products. Complete user
guide for each model is available in electronical format on SATEL web site
www.satel.com
1
SATEL Short Form
User guide V 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SATELLINE-3AS VHF YM5000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Satel SATELLINE-3AS VHF YM5000

  • Page 1: Important Notice

    User guide V 12 IMPORTANT NOTICE All rights to this manual are owned solely by SATEL OY (referred to in this user guide as SATEL). All rights reserved. The copying of this manual (without the written permission from the owner) by printing, copying, recording or by any other means,...
  • Page 2: Restrictions On Use

     The radio modem is only to be operated at frequencies allocated by local authorities, and without exceeding the given maximum allowed output power ratings. SATEL and its distributors are not responsible, if any products manufactured by it are used in unlawful ways.
  • Page 3: Declaration Of Conformity

    SATEL Short Form User guide V 12 DECLARATION OF CONFORMITY Hereby, SATEL Oy declares that SATELLINE radio modems are in compliance with the essential requirements (radio performance, electromagnetic compatibility and electrical safety) and other relevant provisions of Directive 1999/5/EC. Therefore the equipment is labeled with the CE-marking (examples down below).
  • Page 4: Table Of Contents

    INNING ORDER SATELLINE-3ASD EPIC PRO AND –EASY PRO 35W ......... 20 SATELLINE-3AS (YM3040)....20 ECHNICAL SPECIFICATION FOR SATELLINE-EAS 35W (YM6803) ..... 20 ECHNICAL SPECIFICATIONS FOR SATELLINE-EAS 35W ..........21 UTY CYCLE FOR ..................21 INNING ORDERS SATEL COMPACT-PROOF ................22...
  • Page 5 ............37 OWER SUPPLIES AND POWER CABLES 11.8 ............37 ILTERS AND LIGHTNING PROTECTORS 12 SOFTWARE (MS WINDOWS COMPATIBLE) ............ 38 12.1 ....................38 12.2 SATEL NMS PC ..................38 12.3 ............... 38 ONFIGURATION ANAGER 12.4 FCS M ..................38 ONITOR 12.5...
  • Page 6: Satelline-3As Vhf

    SATEL Short Form User guide V 12 1 SATELLINE-3AS VHF 1.1 Technical specifications for SATELLINE-3AS VHF (YM5000) and - 3ASd VHF (YM5010) The model SATELLINE-3ASd VHF (YM5010) is equipped with LCD and push- buttons. Subject Value Frequency range 135 … 174 / 218 … 238 MHz Tuning range 135 …...
  • Page 7: Pinning Order

    SATEL Short Form User guide V 12 1.3 Pinning order D15 female connector in radio modem. DTE is an abbreviation for Data Terminal Equipment DIR. column below denotes the direction of the signal: "IN" is from DTE to the radio modem, "OUT"is from the radio modem to the DTE.
  • Page 8: Satelline-3As Nms And Epic Nms

    SATEL Short Form User guide V 12 2 SATELLINE-3AS NMS and Epic NMS 2.1 Technical specifications for SATELLINE-3AS NMS (YM1070) and -3ASd NMS (YM1075) Special Dual Band version available of both models. Dual Band offers 2 x 2 MHz tuning range with maximum 15 MHz separation between the highest and lowest frequency.
  • Page 9: Technical Specifications For Satelline-3As Epicc Nms (Ym3012) And 3As D Epicc Nms (Ym3013)

    SATEL Short Form User guide V 12 Subject Value Frequency range 330 … 470 MHz Tuning range ± 2 MHz from central freq. Channel spacing 12.5 / 20 / 25 kHz fixed RX Sensitivity / TX power max. -115 dBm / 10 W...
  • Page 10: Pinning Order

    SATEL Short Form User guide V 12 2.4 Pinning order D15 female connector in radio modem. DTE is an abbreviation for Data Terminal Equipment DIR. column below denotes the direction of the signal: "IN" is from DTE to the radio modem, "OUT"is from the radio modem to the DTE.
  • Page 11: Satelline-3As And Satelline-3As Epic

    SATEL Short Form User guide V 12 3 SATELLINE-3AS and SATELLINE-3AS Epic 3.1 Technical specifications for SATELLINE-3AS (YM1011) and - 3ASd (YM1016) Special Dual Band version available of both models. Dual Band offers 2 x 2 MHz tuning range with maximum 15 MHz separation between the highest and lowest frequency.
  • Page 12: Technical Specifications For Satelline-3As Epicc (Ym3002) And -3As D Epicc (Ym3003)

    SATEL Short Form User guide V 12 Subject Value Frequency range 330 … 470 MHz Tuning range ± 2 MHz from central freq. Channel spacing 12.5 / 20 / 25 kHz fixed RX Sensitivity / TX power max. -115 dBm / 10 W...
  • Page 13: Pinning Order

    SATEL Short Form User guide V 12 3.4 Pinning order D15 female connector in radio modem. PORT AND TYPE DIRECTION NAME EXPLANATION PORT1, both models Receive data (Port1) Transmit data (Port1) PORT2 RS-232 model Receive data (Port2) Transmit data (Port2)
  • Page 14: Satelline-Easy

    SATEL Short Form User guide V 12 4 SATELLINE-EASy 4.1 Technical specifications for SATELLINE-EASy (YM6500 without display and YM6550 with display) Subject Value Frequency range 403 … 473 MHz Tuning range 70 MHz Channel spacing 12.5 / 20 / 25 kHz selectable RX Sensitivity / TX power max.
  • Page 15: Pinning Order

    SATEL Short Form User guide V 12 4.2 Pinning order D15 female connector in radio modem. PORT AND TYPE DIRECTION NAME EXPLANATION Receive data (Port1) PORT1: RS-232 Transmit data (Port1) PORT2: RS-232 / 422 Receive data (Port2) Transmit data (Port2) 232 ON / 422 OFF A’...
  • Page 16: Satelline-Easy 869

    SATEL Short Form User guide V 12 5 SATELLINE-EASy 869 5.1 Technical specification for SATELLINE-EASy 869 (YM6501 without display and YM6551 with display) Subject Value Frequency range 869.4125 … 869.6375 MHz Tuning range 10 channels Channel spacing 25 kHz fixed RX Sensitivity / TX power max.
  • Page 17: Pinning Order

    SATEL Short Form User guide V 12 5.2 Pinning order D15 female connector in radio modem. I/O column below denotes the direction of the signal: "IN" is from DTE (Data Terminal Equipment) to the radio modem. "OUT"is from the radio modem to DTE.
  • Page 18: Satelline-1870E

    SATEL Short Form User guide V 12 6 SATELLINE-1870E 6.1 Technical specifications for SATELLINE-1870E (YM4010) Subject Value Frequency range 868 … 870 MHz Tuning range 2 MHz Channel spacing 25 kHz fixed RX Sensitivity / TX power max. -108 dBm / 500 mW...
  • Page 19: Pinning Order

    Programming Mode is used only when installing a radio modem and changing the parameters of a modem. VDD_ Regulated 5.5 V (5.3….5.7 V) DC output. Max load 100 mA. Intended to power external devices made by SATEL (e.g RS-LINK, i-LINK). Not connected SGND Signal ground, internally connected to GND.
  • Page 20: Satelline-3Asd Epic Pro And -Easy Pro 35W

    SATEL Short Form User guide V 12 7 SATELLINE-3ASd Epic Pro and –EASy Pro 35W 7.1 Technical specification for SATELLINE-3ASd Epic Pro (YM3040) Special Dual Band version available. Dual Band offers 2 x 2 MHz tuning range with maximum 15 MHz separation between the highest and lowest frequency.
  • Page 21: Duty Cycle For Satelline-Easy Pro 35W

    SATEL Short Form User guide V 12 7.3 Duty cycle for SATELLINE-EASy Pro 35W If high output power is used continuously or with a high cycle, the equipment generates excess heat. The output power is automatically decreased when necessary to prevent overheating.
  • Page 22: Satel Compact-Proof

    SATEL Short Form User guide V 12 SATEL Compact-Proof 8.1 Technical specification for SATEL Compact-Proof (YM6571 and YM6570) SATEL Compact Proof YM6571 is without battery model. SATEL Compact-Proof YM6570 is with battery model. Subject Value Frequency range 403 … 473 MHz...
  • Page 23: Specification For Battery

    SATEL Short Form User guide V 12 8.3 Specification for battery Subject Value Battery type Panasonic 2S3P, NCR18650PF 7.2 V, 8700 mAh Li-Ion Operating / Charging Voltage +9 … +16 Vdc Charging time Empty to full 5.5 hrs (+20 C Charge / discharge cycles >500 times...
  • Page 24: Pinning Orders

    SATEL Short Form User guide V 12 8.5 Pinning orders Data connector: 8-pin ODU, MINI-SNAP SGND PROG Not connected Not connected Power connector: 4-pin ODU MINI-SNAP Style G4 size 1 PWR (+) PWR (+)
  • Page 25: Customized Satelline Radio Mode

    SATEL Short Form User guide V 12 9 CUSTOMIZED SATELLINE RADIO MODE Down below examples of the customized radio modems. Ask your local SATEL distributor about the various options. 9.1 SATELLINE-M3 VHF (YM6000) technical specifications In an aluminum housing. Subject...
  • Page 26: Pinning Order For Satelline-M3-Tr1

    SATEL Short Form User guide V 12 Subject Value Frequency range 403 … 473 MHz Tuning range 70 MHz Channel spacing 12.5 / 20 / 25 kHz selectable RX Sensitivity / TX power max. -114 dBm / 1 W Interface...
  • Page 27: Satelline-M3-Tr1 869 (Ym6301) Transceiver Module

    SATEL Short Form User guide V 12 9.4 SATELLINE-M3-TR1 869 (YM6301) transceiver module SATELLINE-M3-TR1 869 is available either without housing in PCB format or in aluminum housing. In PCB format the module is available with TNC, MCX, SMA or MMCX antenna connector.
  • Page 28 SATEL Short Form User guide V 12 LVTTL Carrier Detect (in case power/interface-module is LVTTL) GPIN General purpose input for specific purposes GPOUT General purpose output for specific purposes CD_RS OUT RS-232 Reserved for future purposes 0..30V Data Terminal Ready. The pin can be used to wake-up the radio module from the standby mode.
  • Page 29: Pinning Order For D15 Female Connector Adapter

    SATEL Short Form User guide V 12 9.6 Pinning order for D15 female connector adapter NAME LEVEL EXPLANATION 0..30V Data Terminal Ready. The pin can be used to wake-up the radio module from the standby mode. >+3 VDC = ON, <+0.6 VDC or not connected = STANDBY...
  • Page 30: Satelline-M3-R3 (Ym6900) Receiver Module

    SATEL Short Form User guide V 12 9.7 SATELLINE-M3-R3 (YM6900) receiver module SATELLINE-M3-R3 is available without housing in PCB format. Subject Value Frequency range 403 … 473 MHz Tuning range 70 MHz Channel spacing 12.5 / 25 kHz selectable RX Sensitivity...
  • Page 31: Satelline-M3-Tr3 (Ym7000) Transceiver Module

    SATEL Short Form User guide V 12 GPIO9 CMOS/BIDIR GPIO – not used Input for service access. Internally pulled high. SERVICE Pull low / drive low to set UART1 (RD1,TD1) into known state. See separate section of manual. GPIO11 CMOS/BIDIR GPIO –...
  • Page 32 SATEL Short Form User guide V 12 ENA_MOD Internal Pull Down Enable module by pulling HIGH. >1.2 V= Module power is <0.2 V= Module power is CMOS Output Driver Receive data. Data received by module is output on this pin. Driving this pin is prohibited.
  • Page 33: Additional Equipment

    SATEL Short Form User guide V 12 10 ADDITIONAL EQUIPMENT SATEL can offer following additional equipments for SATELLINE radio modems. 10.1 SATELLINK I/O-converters I-LINK 100 i-LINK I-LINK 200 I-LINK 300 Order code YI0007 YI0090 YI0009 YI0010 Digital I/Os Analogue I/Os...
  • Page 34: Accessories

    SATEL Short Form User guide V 12 ACCESSORIES SATEL can offer following accessories for SATELLINE radio modems. 11.1 Interface cables and adapters for RS-232 interface Type Description Lenght Note NARS-1F Adapter D15 m / D15 f, Inc. 2m power supply wires...
  • Page 35: Nms Cable

    SATEL Short Form User guide V 12 11.3 NMS cable Type Description Lenght Note CRS-NMS Cable D15 m / 2 x D9f, 1.5 m Inc. power supply wires (YC0302) from master modem to user system and NMS 11.4 Programming cable...
  • Page 36: Antennas

    SATEL Short Form User guide V 12 11.6 Antennas Examples of antennas for UHF frequency modems (except SATELLINE-EASy Pro 35W): Type Description Gainflex 400 – 435 Half-wave antenna (YA0106) Gainflex 435 – 470 Half-wave antenna (YA0103) CA420Q (YA0107) Sleeve fed quarter wave whip, 405 – 440 MHz CA450Q (YA0107) Sleeve fed quarter wave whip, 440 –...
  • Page 37: Power Supplies And Power Cables

    Half-wave antenna for EASy 869 modems (YA0869) Miniflex 150 Helix antenna for 3AS VHF modems (YA0302) Please contact your local SATEL distributor in order to get more information of different antennas. 11.7 Power supplies and power cables Type Description PS-DIN-2...
  • Page 38: Software (Ms Windows Compatible)

    SaTerm is software, which is used to configuration, testing, reprogramming and for updating the firmware of the SATELLINE-3AS, -3ASd, -EASy, -EASy 869, -3AS Epic, -3ASd Epic, -3ASd Epic Pro, -EASy Pro 35W and SATEL-Compact-Proof radio modems. 12.2 SATEL NMS PC...
  • Page 39 The names of the programs as well as all copyrights relating to the programs are the sole property of SATEL. Any transfer, licensing to a third party, leasing, renting, transportation, copying, editing, translating, modifying into another programming language or reverse engineering for any intent is forbidden without the written consent of SATEL.
  • Page 40: How To Establish A Wireless Data Link

    SATEL Short Form User guide V 12 13 HOW TO ESTABLISH A WIRELESS DATA LINK Down below is the guidance how to establish a basic wireless data link with a pair of SATELLINE radio modems and their accessories. 13.1 List of equipment...
  • Page 41: Equipment Setup

    SATEL Short Form User guide V 12 13.2 Equipment setup Antenna SATELLINE Radio Modem Serial Interface Cable 13.3 Parameter setups The following parameters shall be set equally in the both radio modems Radio frequency Channel spacing Error correction Error check...
  • Page 42: Settings

    PC, which is in terminal emulation state. This can be accomplished by using a suitable program such as the SaTerm, the Windows™ Hyper Terminal program or SATEL Configuration Manager. See the chapter “13 SOFTWARE” to find the correct program. Modem transmits the programming menu in text format to the terminal.
  • Page 43: Error Correction (Fec)

    FEC function decreases data transfer throughput by app. 30 %. Contact your local SATEL distributor in order to get more information of the exact transfer delays introduced by using FEC function. Though transfer delays are slightly longer, it is still...
  • Page 44: Check List / Trouble Shooting

    6. All radio modems in the same system must be configured using the same settings (radio frequency, channel spacing and data field length). In case you need technical support please feel free to contact your local SATEL distributor or send e-mail to our technical support: technical.support@satel.com...

This manual is also suitable for:

Satelline-3asd vhf ym5010Satelline-3asd vhf c ym5030

Table of Contents