Table of Contents
Advertisement
Fault
The display has frozen or does
not respond.
The appliance door cannot be
opened.
lights up on the dis-
play.
The door panels feel warmer
than before after the door panels
have been removed for cleaning.
The cooling fan continues to run
after operation.
Condensation water on the appli-
ance door or condensation water
is dripping.
A message with
appears on
the display.
17
Disposal
17.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Dispose of the appliance in an environmentally
▶
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
18
Customer Service
Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.
This product contains light sources from energy effi-
ciency class G.
Cause and troubleshooting
Malfunction
Switch off the fuse in the fuse box.
1.
Switch the fuse on after appox. 10 seconds.
2.
If the malfunction occurs again, call customer service.
3.
The appliance door remains locked until the cooking compartment has cooled
down.
Wait until the cooking compartment has cooled and goes out.
▶
The door panels have been inserted the wrong way round.
Check whether the door panels have been inserted correctly.
▶
→ "Fitting the door panels", Page 19
Not a fault. The cooling fan continues to run until the temperature that is selec-
ted in the basic settings has been reached.
→ "Basic settings", Page 13
The appliance door does not close correctly.
Check whether the appliance door is installed correctly and closes correctly.
▶
→ "Appliance door", Page 18
Dirt on the seal.
Check whether the seal is dirty, damaged or seated incorrectly.
1.
Clean or replace the seal, or ensure that it is seated correctly.
2.
Normal condensation.
→ "Condensation", Page 8
Malfunction
Set the function selector to the off position.
▶
If the error message does not disappear, contact customer service.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
18.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
You will see the rating plate with these numbers if you
open the appliance door.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.
Disposal en
21
Advertisement
Table of Contents
