Siemens SIMATIC RTLS Operating Instructions Manual page 21

Step 4: Commission transponder of the RTLS5000 product family
• Insert a battery into the RTLS5201T transponder, since it is shipped without a battery.
• In the "Network configuration" client, check whether the transponder is in the default group
and whether the valid firmware is present. If not, return to step 3.
• In the "Network configuration" client, move the RTLS5201T transponder from the default
group to an individual transponder group.
• Activate the "Use in network" and "Localization" options.
• Assign the localization area to the individual transponder group.
SIMATIC RTLS5201T
Operating Instructions, 08/2023, C79000-G8976-C687-02
Installation and operation
3.2 Operation
21