Table of Contents
Advertisement
Quick Links
9889 Garrymore Ln
Missoula, MT 59808
888-687-3552 | +1-406-549-0769
www.aquacreek.com
Check entire box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to installation. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek's
warranty and may aff ect the safety of the user.
Copyright © 2020 Aqua Creek Products All Rights Reserved
350 LB. [160 kg] MAXIMUM WEIGHT CAPACITY
LEAVE THIS MANUAL WITH LIFT OWNER
LEAVE THIS MANUAL WITH LIFT OWNER
READ CAREFULLY
Ranger 2
Pool Lift
PART #: F-RNGR2-04
US PATENT NUMBER: [D507,769 S]
FOR INDOOR OR OUTDOOR USE
MANDATORY
ADA COMPLIANT
1
Revised 1/10/20
Advertisement
Table of Contents
Related Manuals for Aqua Creek Products F-RNGR2-04
Summary of Contents for Aqua Creek Products F-RNGR2-04
- Page 1 It is critical that all parts be carefully inspected prior to installation. If any damage occurred in transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s warranty and may aff ect the safety of the user. Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20...
- Page 2 REDUCE THE RISK OF DROWNING! Supervise children at all times. No jumping or diving from the lift. Seat may be hot, use caution when entering. Keep covered when not in use. Inspect and clean before use. INDOOR BATTERY CHARGER: AMPERAGE = 0.65 FREQUENCY = 60 24 VOLT BATTERY AMPERAGE = 8 IP RATING = IPX5 Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20...
-
Page 3: Table Of Contents
1. RANGER 2 LIFT MAIN ASSEMBLY 2. 24V LINAK BATTERY 3. LINAK CHARGER 4. LINAK HANDSET 5. SAFETY BELT 6. ANCHOR JIG PLATE (IF ORDERED WITH ANCHOR) 7. ANCHOR INSERT BAG - SET OF 4 (IF ORDERED WITH ANCHOR) 8. HARDWARE BAG (IF ORDERED WITH ANCHOR) Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... - Page 4 49.5” 48" ADA REQUIRED CLEAR DECK SPACE 36" (36" X 48") 12" 11" 30.5" 16” **14.5" 13" FIGURE 1 **NOTE: THE MAXIMUM POOL WALL SETBACK IS 19" Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20...
-
Page 5: Anchor Installation: Core-Drill Retro-Fit
You may need to saw cut a portion of your deck. See “Saw Cutting Retro-Fit Instructions” on page 7. Remove the nuts and the black protective coverings from the threaded anchor inserts. Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... - Page 6 Once the epoxy has set up, remove the hardware and the anchor jig plate. Your lift is now ready to be mounted to the anchoring system. The anchor jig plate may be recycled or used to install other anchors. Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20...
-
Page 7: Anchor Installation: Saw-Cut Retro-Fit
9. Pour concrete and fi nish the pool deck surface. SEE FIGURE A 10. Once the concrete has cured, the lift is ready to be mounted to the anchoring system. Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... - Page 8 DRILL & EPOXY INTO EXISTING SLAB (5" MIN EMBED) *SETBACK DIMENSIONS ARE FOR FLAT DECK APPLICATIONS. FOR SLOPED DECKS OR OTHER FEATURES, CONTACT AQUA CREEK BEFORE INSTALLATION. FIGURE C Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20...
-
Page 9: Ramger 2 Assembly Instructions
1/2" X 1 1/2" HEX BOLT (4) 1/2" FLAT WASHER (3) WHEN NOT IN USE, STORE THE POOL BATTERY ON THE CHARGER! WALL ANCHORS (4) INSTALLED FLUSH W/ DECK Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... -
Page 10: Footrest Installation Instructions
2. Using the supplied 1/4” hardware, fasten the legrest assembly to the 2 x 2 tubing. FOOTREST ASSEMBLY 1/4" FLAT WASHER 1/4" LOCK WASHER 1/4" X 5/8" THUMB SCREW FOOTREST IN FOOTREST OUT Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... -
Page 11: Pinch Point Locations
Pinch Point Locations CAUTION! PINCH POINT AREA! CAUTION! PINCH POINT AREA! (BEHIND ACTUATOR) CAUTION! PINCH POINT AREA! (BOTH SIDES) Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... -
Page 12: Field Reverse
FLANGE BUSHING SLEEVE BUSHING 3/8" SHOULDER BOLT REVERSE CHAIR CRADLE ASSEMBLY 3/8" SHOULDER BOLT CONTROL 5/16" NYLOCK 5/16" FLAT WASHER 1/4" BUTTON-HEAD BOLT 1/4" LOCK WASHER 1/4" FLAT WASHER Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... -
Page 13: Basic Troubleshooting
Note: the lift will not retract if the battery is not fully charged or if the control box is not working. The emergency button only overrides the remote handset. Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... -
Page 14: Proper Care Of Pool & Spa Lifts
3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply wax to protect when dry. For service and/or replacement parts, contact Aqua Creek Products Toll free: (888) 687-3552 Copyright © 2020 Aqua Creek Products All Rights Reserved... -
Page 15: Ranger 2 Parts List
1/2 X 3/8 X 3/8 BRB SS-1216-6 BB 1/4 X 1/2 1/4-20 X 1/2 BHSCS BRONZE SLEEVE F-UBC BATTERY COVER WF 1/4 1/4 FLAT WASHER WL 1/4 1/4 LOCK WASHER Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 1/10/20... - Page 16 SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.
Need help?
Do you have a question about the F-RNGR2-04 and is the answer not in the manual?
Questions and answers