Panasonic WV-SW598APJ Operating Instructions Manual page 39

Time
Displays the time period of the data recorded on the SD memory card.
Log
Select a log type to display on the log list.
•
All: All logs will be displayed.
•
Select: Only the logs of the selected log type will be displayed.
–
Alarm log: The log when an alarm is detected will be displayed.
–
Manual/Schedule log: Manual and Schedule logs will be displayed.
•
Default: All
Recording time
Configure the time period of logs displayed on the log list.
•
From: Configure the starting period of logs displayed on the log list.
–
First recording: Displays from the first log recorded on the SD memory card.
–
Today: Displays the logs recorded today.
–
Yesterday: Displays the logs recorded from yesterday to the present day.
–
Last 7 days: Displays the logs recorded from 6 days ago to the present day.
–
Last 30 days: Displays the logs recorded from 29 days ago to the present day.
–
Date/time: Displays the logs recorded from the entered date and time on "Date/time" box.
•
To: Configure the ending period of logs displayed on the log list when "First recording" or "Date/time"
is selected for "From".
–
Last recording: Displays until the last log recorded on the SD memory card.
–
Date/time: Displays the logs recorded until the entered date and time on "Date/time" box.
[Search] button
Searches for logs according to the conditions specified in "Log" and "Recording time".
The search result will be displayed on the log list.
Log list
Displays the log search results.
You can play back recorded data by clicking on the time or duration of the recorded data displayed under
[Time & date] and [Duration].
•
[Top] button: Click this button to display the log listed at the top.
•
[Prev. page] button: Click this button to display the previous page of the log list.
•
[Next page] button: Click this button to display the next page of the log list.
•
[Last] button: Click this button to display the log listed at the bottom.
•
[Time & date]: Time and date when each log has been recorded will be displayed.
Note
•
When "Off" is selected for "Time display format", the alarm occurrence times are displayed in
24 hour time format.
•
The recording timing of logs is as follows.
–
Alarm log: When "Alarm input" is selected for "Save trigger", the alarm occurrence time,
date, and recording time will be filed as a log.
–
Manual/Schedule log: Time and date when recording of images onto the SD memory card
started manually or during the period of the schedule will be filed as a log. When images
are recorded sequentially, logs will be filed on the hour every hour (12:00, 1:00, 2:00, etc.).
However, depending on the photographic subject and the setting used, logs may be filed
in periods of over an hour.
•
[Duration]: Displays the period of time that the data has been recorded on the SD memory card.
•
[Event]: The event type will be displayed.
–
ALM: Log by "Alarm"
–
MN/SC: Log by "Manual/Schedule"
•
[SD memory card]: Available capacity and the original capacity of the SD memory card will be
displayed.
6 Display the log list
Operating Instructions 39