Panasonic WV-SW598APJ Operating Instructions Manual page 14

1 Monitor images on a PC
Note
•
The volume cursor is not displayed when "Audio recording" or "Audio detection" is used.
Audio output button
Turns on/off the audio transmission (play audio from the PC on the unit speaker). This button will be
displayed only when "Audio output", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for
"Audio transmission/reception" on the setup menu. (®page 129)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into the
Audio output volume can be adjusted (Low/Middle/High) by moving the volume cursor
Note
•
When a user is using the audio transmission function with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be inoperable for the other users. When
"Interactive(Full-duplex)" is selected, the transmission button is inoperable for other users.
•
Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically stop. To turn the audio transmission function on,
click the Audio output button again.
•
When the camera is restarted, the adjusted volume level (for both the audio transmission and
reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(®page 129)
•
Actual volume level will change in three steps even though the volume cursor can be adjusted
minutely.
SD recording status indicator
The status of the SD recording can be checked with this indicator.
When the SD recording starts, the SD recording status indicator will light red. It will go off when the SD
recording stops.
This indicator will be displayed when "Manual" or "Schedule" is selected for "Save trigger" on the setup
menu. (®page 59)
Main area
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for "Time display format"
and "Date/time display format". (®page 54)
In addition, when being adjusted, the status of brightness (®page 55), camera position (®page 97),
and the preset ID (®page 112) will be displayed as well as the characters configured for "Camera title on
screen" (®page 54). The number of lines for the display is 3.
Click a desired point in the main area on the "Live" page that is to be the center of the angle of view. The
camera moves to adjust the position in order to set the clicked point as the center.
When selecting an area in the main area by dragging the mouse, the selected area will be located at the
center of the main area. In this case, the zoom ratio will be adjusted automatically.
Zoom can be adjusted using the mouse wheel.
When the main area of the "Live" page is right-clicked, "Auto track" starts for the clicked object. Depending
on the targeted object or its surroundings, "Auto track" may not perform normally.
Note
•
When the camera is operated by a user with a low access level, images displayed on the screen
may be changed temporarily. This does not affect operation of the camera.
•
When the displayed image is being zoomed in more than 30x, the clicked point may not always be
located at the center of the main area.
•
When the mouse is dragged to move the camera beyond its operable range, the camera will move
to the requested direction and will stop at the end of the operable range. Then, the zoom ratio of
the displayed image will automatically be adjusted.
14 Operating Instructions
*3
button and audio from the PC will not be heard.
.
*4
*4