Table of Contents
Advertisement
IMPORTANT
•
When the settings are being configured on the setup menu, sometimes the VMD function may not work
correctly.
[Area]
When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered
in the order of selection.)
[All areas] button
When the [All areas] button is clicked, the whole area will become the VMD area, and "1(White)" will be
automatically applied to "Area".
[Status]
Select "On" or "Off" to determine whether or not to activate each VMD area.
•
On: Activates the respective VMD area.
•
Off: Inactivates the respective VMD area.
•
Default: Off
[Detection area]
Adjust the size of the detection area in the VMD area using the slider. The smaller the selected value is, the
higher the sensitivity of VMD area becomes. The current value (1-10) will be displayed on the right of the slider.
•
Default: 1
13 Configure the alarm settings [Alarm]
Operating Instructions
145
Advertisement
Table of Contents
