Grinder Safety Warnings - Makita GA9040SF01 Instruction Manual

Model GA7030, GA7030S
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA9030, GA9030S
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA7040S
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA9040S
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
) : 6.5 m/s
h,AG
2
2
) : 2.5 m/s
h,DS
2
2
) : 6.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 7.5 m/s
h,AG
2
2
) : 2.5 m/s
h,DS
2
2
) : 5.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
ENG902-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7030, GA7030S,
GA7040S,GA9030, GA9030S, GA9040S
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.

GRINDER SAFETY WARNINGS

Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety
warnings,
specifications provided with this power tool. Failure
to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
2. Operations
recommended to be performed with this power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
3. Do not use accessories which are not
specifically designed and recommended by
the tool manufacturer. Just because the
accessory can be attached to your power tool, it
does not assure safe operation.
5
28.4.2015
Yasushi Fukaya
Director
instructions, illustrations
such as polishing
ENH101-18
GEA010-1
GEB033-7
and
are not