Access Panel - HP EliteDesk 705 G3 Desktop Mini Maintenance And Service Manual

Access panel

To access internal components, you must remove the access panel:
1. Prepare the computer for disassembly
2. Loosen the thumbscrew on the rear of the computer (1).
NOTE:
3. Slide the panel forward and lift if off the computer (2).
NOTE:
If necessary, a Torx T-15 screwdriver may be used to loosen the thumbscrew.
Your computer model may look slightly different from the illustration in this section.
(Preparation for disassembly on page 18).
Access panel 19