Table of Contents
Advertisement
DS-3WF03C Quick Start Guide
Chapter 3 Prepare
Step 1 Use a network cable to connect the computer to the LAN interface of the device or PoE
power supply to prepare the device. First, you need to configure the computer IP address and the
device's default IP address to be on the same network segment. Take the Windows 7 system as an
example. Click the network logo in the lower right corner of the desktop and click Open Network &
Internet settings-Network and Sharing Center. As shown below.
Figure 3-1 Network & Internet settings
Step 2 Click "Local Area Connection" on the right and click "Properties". As shown below.
Figure 3-2 Local Area Connection
10
Advertisement
Table of Contents
