Maintenance - FLASHFORGE 3D PRINTER Focus 8.9 Quick Start Manual

1. Copy the '.svgx' file to the USB stick on the computer. It would be better to remove
USB stick from computer after 'Safely Remove USB stick ' note to avoid file damage.
Print
2. Insert USB stick into the USB stick port in the machine. Click [Print] on the screen
to enter file list and scroll down your page to find the target model file. Please
do not remove USB printing during printing.
Please keep two parts shown in the picture below clear without dust and fingerprint.
Do not pour the used residual resin back to the resin bottle.
The waste resin can be poured into the sealing bag for sealing and then be exposed
to the sun until the resin solidifies.
If the resin drops onto the LCD screen, please wipe it with non-woven fabric in time;
if the resin has solidified, please wipe it via non-woven fabric with alcohol.
Do not clean the residual resin in the resin box with something sharp to avoid the
damage of FEP film.
If the print doesn't work for quite a long time, please
pour the residual resin in the resin box into a closed
container and keep it away from light. If a solidified
model falls into the residual resin, please take it
out as soon as possible.
Load the model files
Tool System

Maintenance

File list
Model-01
Model-02
Model-03
Model-04
13