Brother MFC-7840N Network User's Manual page 21

Multi-protocol on-board ethernet multi-function print server

Hide thumbs Also See for MFC-7840N:

Table of Contents

Double-click the unconfigured device.

Windows

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the

device will appear as Unconfigured in the BRAdmin Light utility screen.

• You can find the node name and Ethernet address (MAC address) by printing the Network Configuration

List. See Printing the Network Configuration List on page 27.

Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of

your print server.

Windows

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Configuring your machine for a network

Macintosh

Table of Contents

Troubleshooting