Remove The Edp Cable - Lenovo 13ITL6 Hardware Maintenance Manual

Figure 7. Disconnect the EDP cable from the LCD module and remove the LCD module.
Go to https://support.lenovo.com/partslookup
replacement parts:
LCD module
Conductive cloth

Remove the EDP cable

Make sure the following FRU (CRU) has been removed.
"Remove the LCD module" on page 28
Step 1. Peel off the tape. Disconnect the EDP cable from the system board and then remove the EDP
cable.
Figure 8. Remove the EDP cable.
Go to
https://support.lenovo.com/partslookup
replacement parts:
EDP cable
Conductive cloth
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
31