Figure 16. Remove the fan
Screw specifications
M1.6 x L1.7
Go to
https://support.lenovo.com/partslookup
part:
Fan
Remove the EDP camera cable bracket
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case (with battary)" on page 27
"Remove the heat sink" on page 33
Step 1.
Remove two screws and then remove the bracket.
Figure 17. Remove the EDP camera cable bracket
Number of screws
4
to look up the Lenovo part number of the following replacement
Torque force (kgf.cm)
1.85 ± 0.15
.
Chapter 4
Removing a FRU or CRU
35