AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 15.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Press button
to confirm your choice and start the pyro-cleaning cycle.
To select ECO pyro-cleaning, turn the "Browse" knob": the word ECO appears bottom right on the display.
Press button
to start the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
The door remains locked at the end of the cleaning cycle: COOL" appears on the display, indicating the
oven is still cooling down. When the oven cools to a safe temperature, the symbol
display shows "END".
N.B.: if the automatic door lock control procedure fails to execute properly, the symbol
display. If, on the other hand, the door remains closed due to a fault in the locking system,
LATCHED" appear on the display. In this case, contact the After-sales Service.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
associated with the buttons are locked and the display shows a key symbol. This function can also be
activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is
activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously
selected function will have to be set again.
and
at the same time for at least 3 seconds. When activated, the functions
: the word PYRO appears on the display.
EN14
appears on the display.
switches off and the
appears on the
and "DOOR