Automatic Oven Cleaning - Whirlpool AKZ 278 User And Maintenance Manual

Pizza
1. Turn the Functions knob to symbol
proceed as follows:
2. Turn the "Browse" knob: "PIZZA" appears on the display.
3. Press to select the function.
3
4. Turn the "Browse" knob to set the required temperature (between 220°C and 250°C) and confirm with
button .
3
5. Turn the "Browse" knob to set the required cooking duration and press
SETTINGS
Turn the "Functions" knob indicator to the symbol
settings which can be changed.
Clock
Turn the "Functions" knob to the symbol
of day, see the previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after
the end of cooking. In addition, the oven light is switched off during cooking. To view information on the
display and switch the light on again, simply press button
1. Turn the "Browse" knob to display "ECO.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1. Turn the "Browse" knob to display "SOUND.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1. Turn the "Browse" knob to display "BRIGHTNESS.
2. Press button : number 1 appears on the display.
3
3. Turn the "Browse" knob to increase or decrease brightness and confirm by pressing

AUTOMATIC OVEN CLEANING

For the description of this function, see the chapter CLEANING and the functions table at page 7.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Turn the "Functions" knob to symbol
2. Press button to confirm your choice and start the pyro-cleaning cycle.
3
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display.
Press button to start the shorter programme.
3
During pyro-cleaning, the oven door is automatically locked and the symbol
remains locked at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven is still cooling
down. When the oven cools to a safe temperature, the symbol
N.B.: the automatic door lock control procedure fails to execute properly, the symbol
display. If, on the other hand, the door remains closed due to a fault in the locking system,
LATCHED" appear on the display. In this case, contact the After-sales Service.
: the display shows "BREAD". To select the "PIZZA" function,
to access a submenu containing four display
: the word CLOCK appears on the display. To change the time
or turn a knob.
3
: the word PYRO appears on the display.
switches off and the display shows "END".
GB6
to start cooking.
3
.
3
.
3
.
3
appears on the display. The door
appears on the
and "DOOR