Setting Up The Handset For Use - Gigaset A116 User Manual

Setting up the handset for use

Inserting the batteries
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries with the polarity in the right
direction.
Note the polarity shown on the battery
compartment.
¤
First insert the battery cover on the top
¤
Then press the cover
¤
To open it again, place your fingernail in the
notch on the underside of the casing and pull
the battery cover up.
Charging the batteries
¤
Fully charge the batteries in the base prior to
initial use.
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the batteries will decrease for technical reasons.
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
MENU Press the keys
displayed
¤
To select a different language:
selected on the display, e. g. Francais
To revert to idle status:
1
until it clicks into place.
2
slowly in succession . . . the language set (e. g. English) is
Press the control key
OK (
Press and hold the End call key
.
until the language required is
= selected)
Getting started
1
2
5h
7