Installation Instructions; Uninstalling The Card - Nvidia 900-9X662-00 53-ST1 User Manual


Do not force the bracket onto the adapter card.
2. Screw on the bracket using the screws saved from the bracket removal procedure above.

Use a torque driver to apply up to 2 lbs-in torque on the screws.

Installation Instructions

This section provides detailed instructions on how to install your adapter card in a system.

Please note that the following figures are for illustration purposes only.
Connect the adapter Card in an available PCI Express x16 slot in the chassis.
Step 1: Locate an available PCI Express x16 slot and insert the adapter card to the chassis.
Step 2: Applying even pressure at both corners of the card, insert the adapter card in a PCI
Express slot until firmly seated.

Do not use excessive force when seating the card, as this may damage the chassis.
Secure the adapter card to the chassis.
Step 1: Secure the bracket to the chassis with the bracket screw.

Uninstalling the Card

Safety Precautions
The adapter is installed in a system that operates with voltages that can be lethal. Before
uninstalling the adapter card, please observe the following precautions to avoid injury and prevent
damage to system components.
1. Remove any metallic objects from your hands and wrists.
2. It is strongly recommended to use an ESD strap or other antistatic devices.
3. Turn off the system and disconnect the power cord from the server.
Card Removal

Please note that the following images are for illustration purposes only.
1. Verify that the system is powered off and unplugged.
2. Wait 30 seconds.
3. To remove the card, disengage the retention mechanisms on the bracket (clips or screws).
16