Table of Contents
Advertisement
Interfaces
The below figure show the component side of the NVIDIA ConnectX-6 Lx adapter card. Each
numbered interface that is referenced in the figures is described in the following table with a link
to detailed information.
The below figures are for illustration purposes only and might not reflect the current
revision of the adapter card.
Callout
1
"ConnectX-6 Lx IC"
2
"PCI Express Interface"
3
"Ethernet SFP28/QSFP28
Interface"
4
"Networking Ports LEDs Interface"
"SMBus Interface"
"Voltage Regulators"
Item
NVIDIA ConnectX-6 Lx IC on the board.
PCIe Gen 3.0/4.0 through an x8 edge connector.
Ethernet traffic is transmitted through the adapter's
SFP28/QSFP28 connectors. The networking
connectors allow for the use of modules, optical and
passive cable interconnect solutions.
There are two I/O LEDs per port to indicate speed
and link status.
Allows BMC connectivity using MCTP over SMBus or
MCTP over PCIe protocols.
Voltage supply pins that feed onboard regulators.
Description
10
Advertisement
Table of Contents
Troubleshooting
