User Config Menu - Sony LMD-3251ST Instructions For Use Manual

USER CONFIG menu

The USER CONFIG menu is used for setting the
system, multi display, function button, computer detect,
option DVI and 3D.
USER CONFIG
S Y S T E M S E T T I N G :
M U LT I D I S P L AY S E T T I N G :
F U N C T I O N B U T T O N S E T T I N G :
C O M P U T E R D E T E C T :
O P T I O N DV I S E T T I N G :
3 D S E T T I N G :
SYSTEM SETTING
Submenu
MATRIX
COMPONENT LEVEL
NTSC SETUP
GAMMA
32
Adjustment Using the Menus
Setting
Applied to 480/60i or 480/60p
signal. Select 601 or 709.
Selects the component level from
among three modes.
• SMPTE: for 100/0/100/0 signal
• BETA7.5: for 100/7.5/75/7.5
signal
• BETA0: for 100/0/75/0 signal
Selects the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
Selects the appropriate gamma
mode from between two settings
*
("2.2", "DICOM" ).
When "2.2" is selected, the setting
is roughly same as the gamma
mode of the CRT.
*
"DICOM" is selectable when
COLOR SPACE is set to OFF.
Submenu Setting
FORMAT DISPLAY Selects the display mode of the
signal format and scan mode.
• AUTO: The format is displayed
• ON: The format is always
• OFF: The display is hidden.
LANGUAGE Selects the menu or message
language from among seven
languages.
• ENGLISH: English
•
•
• ITALIANO: Italian
• ESPAÑOL: Spanish
• DEUTSCH: German
• FRANÇAIS: French
POWER SAVING Sets the power saving mode on or
off. When you set to ON, the
monitor goes into power saving
mode if no signal is input for about
one minute.
I/P MODE You can select the I/P mode when
the interlace signal is input.
• INTER-FIELD
• LINE DOUBLER: The
• FIELD MERGE
*1
When MULTI DISPLAY
ENABLE is set to ON, INTER-
FIELD cannot be selected.
*2
When DISPLAY LAYOUT is set
to SIDE BY SIDE, FIELD
MERGE cannot be selected.
for about five seconds when
the input of the signal starts.
displayed.
: Chinese
: Japanese
*1
: Mode for
giving precedence to the
picture quality. Performs
interpolation depending on
the movement of the images
between the fields. It takes
longer than "FIELD
MERGE" or "LINE
DOUBLER" for processing
the picture. "INTER-
FIELD" is the factory
setting.
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
*2
: The
processing time is shorter.
Combines the lines in the
odd fields and even fields
alternately regardless of the
movement of images.
Suitable for viewing still
images.