Sony LMD-3251ST Instructions For Use Manual page 36

CHECKERBOARD
Press the button to display the left/right 3D input signals
in a checkerboard pattern on the screen, allowing you to
simultaneously monitor the two signals. Pressing the
button again displays the input signals in default pattern.
Note
This function is only available in 2D display mode.
This function is only available when 3G-B or DUAL is
selected.
Install BKM-250TGM or BKM-250TG with a serial
number of 7300001 or greater to operate the unit by
selecting 3G-B.
Checkerboard display
Left signal (L)
Checkerboard display
L/R SWITCH
Press the button to quickly switch the left/right 3D input
signals, allowing you to easily compare each signal.
Note
This function is only available in 2D display mode.
This function is only available when 3G-B or DUAL is
selected.
Install BKM-250TGM or BKM-250TG with a serial
number of 7300001 or greater to operate the unit by
selecting 3G-B.
HOROPTER CHECK
Press the button to select display formats in monitoring
left/right signals for 3D image display. Select the desired
format from HOROPTER CHECK (page 38) under the
3D SETTING menu. Pressing the button again switches
to default display format.
Note
This function is only available in 3D display mode.
36
Adjustment Using the Menus
Right signal (R)
This function is only available when 3G-B or DUAL is
selected.
Install BKM-250TGM or BKM-250TG with a serial
number of 7300001 or greater to operate the unit by
selecting 3G-B.
DISPARITY SIM. (disparity simulation)
Press the button to change the phase of left/right signals
for 3D image display. You can monitor the depth of 3D
images using simulated 3D effect. Press the
button to adjust the phase of the selected signal(s).
Select the signal(s) you want to adjust from
DISPARITY SIM. under the 3D SETTING menu before
using this function button. Pressing the button again
stores the setting values you set.
Note
This function is only available in 3D display mode.
This function is only available when 3G-B or DUAL is
selected.
Install BKM-250TGM or BKM-250TG with a serial
number of 7300001 or greater to operate the unit by
selecting 3G-B.
Scan mode image
4
3
4 :3
1440 × 1080
4
1728 × 1080
–
+
or –
16
9
16:9
1920 × 1080
16
9
3
1920 × 1080
1280 × 720