1. Overview 1.1 Fron t Panel Name Description IR Receiver Receiver for signals from the IR remote control. Power: When power is on, the LED will continue lighting in green. LED Indicator HDD: When power is on, the LED will continue lighting in red. When HDD is reading/writing data, the LED will flashes red.
Note: 1. Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information. Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process.
2. Basic Installation 2.1 Hard Disk Installation You can install two 3.5” HDDs inside the NVR for recording videos. The maximum capacity of each HDD is 8TB. 1. Make sure the NVR is power-off. 2. Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To remove the housing cover from the NVR, push the cover backward and then lift it.
2. Connect microphones to the audio input ports to transmit audio from the NVR to the remote sites (Web browser of NVR, eFVMS App or EverFocus CMS). Note that the microphones with a (built-in) amplifier and external power supply are required.
• If you have never configured the email settings, please mail the MAC Address, Serial Number and the Model Name to ts@everfocus.com.tw to get a temporary password.
Page 7
The P2P function allows users to add NVRs to EverFocus’ eFVMS App through QR code. 1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to Apple Store. After the installation process is complete, start eFVMS App.
Page 8
3. Scan the NVR’s QR code on the System Info page of the NVR OSD menu. Input the NVR ID, password and Media Port. Than tap the Save button. …… 4. The NVR is now added and connected to the App. You can start accessing the NVR. IRONGUARD 16 POE IRONGUARD 16 POE IRONGUARD 16 POE...