Removing The Ccd - Clevo P957HP6 Service Manual

Table of Contents

Advertisement

Disassembly

Removing the CCD

Figure 11
CCD Removal
1. Turn off the computer, turn it over to remove the battery
2. Lay the computer down on a flat surface with the top case up forming a 130 degree angle. Carefully remove the
a. Remove
rubber
and
mylar covers
screws and then careful-
3. Run your fingers around the inner frame of the LCD panel to lift at points
ly
release
the
inner
slightly lift up the outer frame at point
frame of the LCD panel
inner frame at the lower point
at the points indicated by
4. Remove the LCD front cover
the arrows.
b. Remove the LCD front
cover.
a.
b.
9. LCD Front Cover
• 2 Screws
2 - 16 Removing the CCD
-
and screws
1
2
3
as indicated by the arrows
8
(Figure
5
3
1
(page 2 -
6).
-
.
4
as indicated by the arrows, and then run your fingers again around the
7
(Figure
11a).
11b).
7
4
2
9
-
as indicated by the arrows, and
5
6
6
5
8

Advertisement

Table of Contents
loading

Table of Contents