Screen; Normal; Full; Wide(16:9) - Panasonic PT-TW231REA Operating Instructions Manual

Screen

Select [Screen] from the Main Menu (see
"Navigating through the menu" on page 36),
then select the item from the sub-menu.
Remote control

Normal

Provide the image to fit the screen size while
maintaining the aspect ratio of the input signal.
Press ▲▼ to select [Normal] and then
press the <ENTER> button.

Full

Provide the full screen image.
Press ▲▼ to select [Full] and then press
the <ENTER> button.

Wide(16:9)

Provide the image at the 16:9 wide screen ratio.
Press ▲▼ to select [Wide(16:9)] and then
press the <ENTER> button.

Zoom

Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
Press ▲▼ to select [Zoom] and then
press the <ENTER> button.
48
- ENGLISH
Control panel

True

Provide the image in its original size. When the
original image size is larger than the panel size (1280
x 800), the projector enters to the panning mode
automatically.
1 ) Press ▲▼ to select [True] and then
press the <ENTER> button.
2 ) Press ▲▼◄► to pan the image.
When adjusted, the arrows will turn red. When
z
reached to the correction limits, the arrows will
disappear.
Note
When input computer signal to the projector, [True] will
z
be available.
[True] is disabled and cannot be displayed when [480i],
z
[576i], [480p], [576p], [720p], [1035i] or [1080i] is selected
in the PC System Menu.
When [True] is selected in the Screen menu, [Digital
z
zoom +/-] can not be selected

Natural wide

Modify the 4:3 aspect ratio image to fit the screen size
by stretching the image to make it look natural.
Press ▲▼ to select [Natural wide] and
then press the <ENTER> button.
Note
When input video signal to the projector, [Natural wide]
z
will be available.

Custom

Provide the last stored aspect screen image.
Press ▲▼ to select [Custom] and press
the <ENTER> button.
.