Security; Fan - Panasonic PT-TW231REA Operating Instructions Manual

Security

This function allows you to use the Key lock and PIN
code lock function to set the security for the projector
operation.
1 ) Press ▲▼ to select [Security].
2 ) Press ► or the <ENTER> button to
access the submenu.
Key lock
J
This function locks the control panel and remote
control buttons to prevent operation by unauthorized
persons.
1 ) Press ▲▼ to select the desired items
as below.
Unlocked.
Lock the operation of the control
panel. To unlock, use the remote
control.
Lock the operation of the remote
control. To unlock, use the control
panel.
PIN code lock
J
This function prevents the projector from being
operated by unauthorized persons and provides the
following setting options for security.
1 ) Press ▲▼ to select the desired items
as below.
Off Unlocked.
Enter the PIN code every time
On 1
turning on the projector.
Enter the PIN code to operate
the projector once the power cord
is disconnected; as long as the
On 2
AC power cord is connected, the
projector can be operated without
a PIN code.
Attention
Whenever you change the PIN code lock setting or the
z
PIN code (the four-digit number), you are required to
enter the PIN code. The "1234" is set as the initial PIN
code at the factory.
PIN code change
J
The PIN code can be changed to your desired four-
digit number.
1 ) Press ▲▼ to select [PIN code change]
and then Press <ENTER> button.
Current Pin code dialog box appears.
z
2 ) Press ▲▼ to enter the current code.
Press ► button to fix the number and
move the red frame pointer to the next
box.
The New PIN code input dialog box appears.
z
3 ) Repeat these steps to set a new PIN
code.

Fan

1 ) Press ▲▼ to select [Fan] and then
Press <ENTER> button.
2 ) Press ▲▼ to select one option.
This function provides the following options in
z
the cooling fans' operation when the projector is
turned off.
L 1 Normal operation.
The fan speed is the same as
L 2 L1, but it takes more time to cool
the projector down.
Setting
57
ENGLISH -