Setting The Alarm Time - Sangean ProTravel PT-50 Operating Instructions Manual

02 Yacht Boy 50, GB
SETTINGS

Setting the alarm time

19.08.2003 14:27 Uhr
_______________________________________________________________
Setting 12 or 24 hour format
1 Press »12/24« to switch between 12 and 24 hour clock format.
– Display: »AM« or »PM« for 12 hour format.
The alarm time is always set in local time »HOME«. Before you set the alarm time, you must
select the alarm signal (radio station or signal tone).
1 Press »ALARM«.
– Display: »ALARM« flashes.
2 While »ALARM« is flashing, press »ALARM« to select the radio alarm (»
signal tone (» «).
– Display: » « or »
Hold down »ALARM SET« until the alarm time flashes in the display.
3
Set the hours for the alarm time using »HR.« and the minutes using »MIN.«.
4
5 Press »ALARM SET« to confirm the setting.
– Display: »ALARM -
Seite 31
« flashes for two seconds and then remains lit.
« or »
- ALARM«.
«) or
10