Mw/fm/lw pll synthesized 3 bands tuning clock radio (20 pages)
Summary of Contents for Sangean UCR-100
Page 1
FM DIGITAL TUNING UNDER CABINET CLOCK RADIO RADIO-REVEIL FM NUMERIQUE DE DESSOUS D’ELEMENT RADIO-RELOJ CON SINTONIZACIÓN DIGITAL DE FM DIGITALE WEKKER MET DIGITALE FM TUNING (VOOR BEVESTIGING ONDER KASTPLANK) UKW-UNTERBAURADIO MIT WECKER 381R901-A Operating instruction Mode d’emploi Instruccions de manejo Gebruiksaanwijzing Bedienungsanleitung UCR-100...
Important safety instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed.
Page 3
10. Don’t install defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
Page 4
14. Only use attachment/accessories specified by the manufacture. 15. If the radio is left attended and unused for long periods of time, unplug it form the wall outlet. This will prevent damage caused by lightning or power line surges. 16. If the radio is left unattended and unused for a long period of time, remove the batteries.
Page 6
Your clock radio is designed for substructure-installment under shelves, kitchen cupboards etc. The speaker must point downwards and be unobstructed to offer the best possible sound quality. Please don’t install this appliance close to stove or other cooking appliance so that is not subjected to damaging steam. The clock radio is to be mounted in the desired position with the bracket , on the appliance.
Control Keys Tuning Up and Down Clock Set Radio Alarm Buzzer Alarm Timer Power Volume Up and Down AUX IN Time Auto Setting switch Presets F-type FM antenna connector Power jack...
LCD display Clock set Hour and minute digits Preset memory Alarm time Timer Buzzer alarm Radio alarm Time Auto Setting Auto Off Operation Time Manual Setting (if there is no automatic setting) 1. After the radio is plugged in the power, the display shows ‘ -:—‘ 2.
Time Auto Setting When the radio is off, touch and hold the key for 2 seconds. The display will flash . And the clock will be set automatically. When the clock is not corrected by Time Auto Setting yet, the radio will operate the Auto Time Setting function for 15 minutes in every hour.
Page 10
Alarm setting: 1. Touch the key ), to check the Buzzer alarm time (or Radio alarm time). The display will show back the present time after 7 seconds. Or you can touch the same key to go back to the present time. 2.
Activate/deactivate: 1. Touch the key for 2 seconds to activate the Buzzer alarm (or Radio) alarm. And the display shows “ ” or “ ” with the alarm time. (When Buzzer alarm and Radio alarm are both activated, it shows the incoming alarm time) 2.
Station Preset 1. Tune into the station that you would like to store. 2. Touch the PRESET STATION key (number 1, 2, 3,4, 5 or 6) for 2 seconds to store the station into the desired preset (1-6). 3. To recall the preset station, touch the STATION PRESET key 1-6 for less than 2 seconds.
Timer 1. Touch the key , and touch the TUNING UP or DOWN key ) to adjust the time. 2. Touch the key again to complete the setting. It will beep for 3 minutes when the set time is elapsed. 3.
Technical data Power: 230 Volt/50 Hz, 7 Watts Frequency coverage: FM 87.5 – 108.0 MHz If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.