About Common Venting - Bradford White Brute LX Installation And Operation Instruction Manual

Brute LX
MATERIAL
Stainless Steel
PVC, sch 40
CPVC, sch 40
Polypropylene
Table 8. Required Exhaust Vent Material.

3.3.1 About Common Venting

NOTICE
DO NOT COMMON VENT BRUTE LX UNITS.Brute
LX units are never permitted to share a vent with
Category I appliances.
NE PAS ÉVENT COMMUNE BRUTETE LX UNITÉS.
Brutete LX unités ne sont jamais autorisés à
partager un évent Catégorie I avec les appareils.
INSTALLATION STANDARDS
UNITED STATES
UL 1738
ANSI/ASTM D178
ANSI/ASTM F441
UL1738 or ULC-S636
AVIS
Venting must be ULC-S636 certified for use as
venting material. The venting material must be chosen
based upon the intended application of the boiler.
Allowable Polypropylene Vent Manufacturers
/ Trade Names
MFR (model number abbreviated*)
Centrotherm
Example
Components InnoFlue
Single Wall Pipe ISVLxxxx
Elbow ESELxxxx
PVC adapter ISAGxxxx
Notes:
"x", "xx" and "xxxx" refer to variations in nominal size. See manufacturer's
catalog for a particular application.
These manufacturers samples have been tested and authorized to safely
operate with Laars equpment.
Only the above manufacturers and models have been approved.
Substitutes are not allowed.
Manufacturers materials and models may not be mixed in the same
application.
Contact Polypropylene manufacturer's distributor for complete model
number selection.
Installer must follow Polypropylene manufacturers installation instructions.
Table 7. Allowable Vent Manufacturers
Figure 9. Minimum Venting Distance.
Page 13
CANADA
DuraVent Selkirk
Trade Names/Models
PolyPro Polyflue
xPPS-x xPF-xx
xPPS-E90 xPF-90
xPPS-AD xPF-PVC-PF