Assembling The Intake System - RedMax GZ4350 Workshop Manual

7.15

Assembling the intake system

1
Fit the inlet pipe assy, B. See figure 25.
2
Fit the intake flange, C. See figure 25.
3
Fit the carburettor and the throttle rod as outlined
in "Assembling the carburettor".
4
Fit the air filter, the filter holder, the cable from the
intake flange holder.
5
Fit the cylinder cover.
NOTE!
It is very important that the intake system is
sealed. Otherwise the engine may seize up.
Fig 25
Repair Instructions
32
English -