Samsung SSC-21WEB Installation Manual page 32

5. ALARM & BUZZER Setup
• Use this to select audio output channel for
alarm and video loss occurrence while in the
System operation Setup and Quad modes.
• Use the ` L a ` M a keys ` ˇ a ` ˆ a to set
the Alarm Hold Time Setting Mode. Alarm
Hold Time can be between 0 to 30 minutes; 59
seconds.When more than one Alarm occurs,
Alarm hold time goes comes into effect in the
order of the Alarm occurrence.
• Use the ` L a ` M a keys ` ˇ a ` ˆ a to set
ALARM and LOSS to either ON or OFF.
• If ON is selected, Channel Audio will be muted and buzzer will sound in the event of
alarm trigger or video loss.
• Use the ` L a ` M a keys ` ˇ a ` ˆ a to select the desired channel for Audio output during
Quad Mode.
• Press the ENTER key, all the adjustments are stored in the memory and the display returns
to the Main Menu screen.
6. VIDEO ADJUSTMENT Setup
• Use to set up items concerning video signals such
as CONTRAST, BRIGHT, etc.
• Select the item to change, ` L a ` M a then use the
` ˇ a ` ˆ a keys to change the numerical value.
A numerical value can range from 0 to 100.
• "EXIT" will allow you to choose whether to save
the changed data.
"SAVE" : Saves the changes
"PRESET" : Resets all the setting to factory
preset.
"QUIT" : Exits the setup mode without saving.
• Press the ENTER key, all the adjustments will be stored in the memory and the will
display returns to the Main Menu screen.
✳ Preset values of all setting
CONTRAST : 80
BRIGHT
COLOR
TINT
SHARP
EXIT
: 50
: 50
: 50
: 50
: PRESET
31