Channel Select - Samsung SSC-21WEB Installation Manual

z MENU
Displays the SYSTEM MENU on the screen.
The setup is possible in all modes, except when an alarm occurs.
{ LED
Indicates the current status of Display Modes, both ZOOM and FREEZE.
Freeze : LED flashes in red during the freeze mode.
Zoom : LED flashes green in the zoom mode.
✳ When the display is in both Freeze and Zoom modes, LED will be lit in Orange.
| VCR/ENTER
VCR
Displays the VCR reproduction input signal.
(Loss information for all channels will not be displayed.)
If VCR playback input signal is lost, the display shown will have a blue back screen.
ENTER
In QUAD, SINGLE, AUTO SWITCHER, and PIP MODE, this is used to store changes
made to preset values as well as to select or cancel the function.

} CHANNEL SELECT

When switching to SINGLE MODE
Used when switching to SINGLE MODE from QUAD, AUTO SWITCHER MODE.
Main screen switch
Used when switching from Sub screen to Main screen in the PIP Mode.
Selected channel becomes the Main screen of PIP mode.
FREEZE Select/Cancel
Used to select or cancel Freeze mode for all or certain displayed channel(s) during Quad
mode.
The Freeze mode will be cancelled when the corresponding channel key is pressed while
in the Freeze mode.
ZOOM Area and CURSOR Movement
Used to move the Zoom Area and the Cursor while in System Mode.
Changing Preset values
In the System Setup Mode, use the ` L M ˇ ˆ akeys to change the preset values.
25