How To Replace: Lamp - Zanussi ZOPNA7KN User Manual

Table of Contents

Advertisement

CARE AND CLEANING
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
Make sure that you put the glass panels (A
and B) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and as‐
sembly easier.
When installed correctly the door trim clicks.
Make sure that you install the middle panel of
glass in the seats correctly.

12.6 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
32/40
clean the glass panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
A
B
Step 3
Put a cloth on the bottom of
the cavity.
A
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zopna7xn

Table of Contents