SETTING THE SPEAKER LEVEL
You can set the balance and level of speakers.
1.
Press the SETUP/MENU button.
•
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2.
Press the ENTER button to select SETUP ENTER.
3.
Press the ▲▼ buttons to select SPK LEVEL, and then press the ENTER
or ► button.
4.
Press the ▲▼ buttons to select the speaker you want, and then press the
ENTER or ► button.
•
Each time you press this button, F.L Æ F.RÆ CEN Æ S.L Æ S.R Æ
S.W will be selected in turn.
5.
Press the ▲▼ buttons to set the Speaker Level mode.
•
You can adjust it from -10 to +10dB in 1 step increments.
•
The sound gets quieter at -10dB and louder at +10dB.
- To exit setup mode -
•
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
- Setting Speaker Level -
• F.L (front left) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
Æ
Æ
Æ
Æ
37