Setting the Speaker Level
You can set the balance and level of speakers.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
3.
Press the ▲▼ buttons to select SPK LEVEL, and then press
the ENTER button.
4.
Press the ▲▼ buttons to select the speaker you want.
Each time you press this button, F.L F.R CEN S.L
•
S.R SBL SBR S.W will be selected in turn.
5.
Press the ◄ ► buttons to set the Speaker Level mode.
•
You can adjust it from -10 to +10dB in 1 step increments.
•
The sound gets quieter at -10dB and louder at
+10dB.
- Setting Speaker Level -
• F.L (front left) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• CEN (centre) : -10 ~ +10dB
✎
NOTE
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front
Height Speaker (FHL/FHR).
You can also change the subwoofer level by using the SUBWOOFER,
control.
HW-D700_D770S_ELS_0609.indd 39
HW-D700_D770S_ELS_0609.indd 39
FRONT LEFT
FRONT RIGHT
CENTER
SURROUND LEFT
SURROUND RIGHT
> MOVE
SELECT
• SW (subwoofer) : -10 ~ +10dB
• SBL (surround back left) : -10 ~ +10dB
• SBR (surround back right) : -10 ~ +10dB
• FHL (front height left) : -10 ~ +10dB
• FHR (front height right) : -10 ~ +10dB
<
>
,
SPEAKER LEVEL
◄
0dB
►
0dB
0dB
0dB
0dB
▼
' RETURN
EXIT
buttons on the remote
39
English
2011-06-09
2011-06-09
5:38:31
5:38:31