BASIC FUNCTIONS
6. EPG (Electronic Program Guide)
EPG-Electronic Program Guide
The electronic program guide gives you a channel list for the
channels.
N N o o t t e e
: 1. This service depends on service provider.
2. After receiver recognized the GMT-time from the signal
which takes few seconds, it can display correct EPG
information.
●
Press the GUIDE key while you are viewing a program.
This function is displayed on the screen by using only time.
●
RED key
: Red key is for moving back to the
previous date.
●
GREEN key : Green key is for moving to the next coming date.
●
i key
: This key is used to watch the program information, if there is more
information than one page. Use the / keys to move up and down
pages.
¦/ key
●
: Use to display the program list by 30
minutes per block.
Time interval can be adjusted by press keys as followings on EPG screen:
1 Key: 1 hour and 30 minutes
2 key: 30 minutes
Select the channel by pressing the / keys and press the OK key to watch this channel.
●
3 key: 15 minutes
GB-14
D
I
G
I
T
A
L
T
Main Menu
After installing your antenna system and STB with appropriate
connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Installation, Channel Organization and
Parental Lock, you need the PIN Code.
1. Installation
This menu consists of 3 sub-menus:
Auto Scanning, Manual Scanning and
Reset to Factory Defaults.
●
Select "Installation" in the main menu mode to select the sub
menu.
●
Enter the PIN Code.
If you have not entered your own PIN Code then the PIN Code
0000 applies, which was set at the factory.
E
R
R
E
S
T
R
I
A
L
R
E
C
E
OPERATING THE RECEIVER
I
V
E
R
GB-15