Table of Contents
Advertisement
VCR Setup
Setting the Channels
Once the VCR memorizes all the available channels, you can use the CH
Setting the Source
Before the VCR can memorize available channels, you must set the signal source for your VCR.
With the VCR on, press the MENU button.
1
and ❿ to select "CHANNEL SETUP."
Press
If you have a cable system hooked up to your VCR,
2
leave CABLE TV displayed in the Ant/Cable screen.
If you have an antenna hooked up to your VCR, press
3
❿ until ANTENNA appears. Press the MENU button
when you have selected the correct signal source.
Memorizing the Channels
and ❿ to select
Press the MENU button. Press
1
"CHANNEL SETUP."
and ❿ to start Auto channel memory function.
Press
2
Your VCR will begin memorizing all available channels.
3
To interrupt, press the MENU button on the remote con-
trol. When the channel number on screen stops chang-
ing, the VCR has finished.
12
buttons to select channels.
MAIN MENU
Timer recording
Clock set/adjust
❿ Channel setup
VCR function setup
Language/Lengua/Langue
❷ %
❿
]
[
/
]
[MENU/EXIT
CHANNEL SETUP
❿ Ant/Cable:
[CABLE TV]
Auto channel memory
Channel add/delete
[
❷ %
/
❿
]
[MENU/EXIT
]
CHANNEL SETUP
❿ Ant/Cable:
[ANTENNA]
Auto channel memory
Channel add/delete
❷ %
❿
]
[
/
]
[MENU/EXIT
MAIN MENU
Timer recording
Clock set/adjust
❿!Channel setup
VCR function setup
Language/Lengua/Langue
❿
]
❷ %
[
/
]
[MENU/EXIT
CHANNEL SETUP
Ant/Cable:
[CABLE TV]
❿ Auto channel memory
Channel add/delete
❷ %
❿
]
[
/
]
[MENU/EXIT
Memorizing
CH 02
. . . . .
. . . . .
please wait
VCR Setup
Adding or Deleting Memorized Channels
You can add or delete channels that have been memorized with the Automatic Channel Memory function. The
Auto Channel Memory function must be performed before Channel Add/Delete can be used.
and ❿ button to select
Press the MENU button. Press
1
"CHANNEL SETUP."
and ❿ button to select "Channel Add/Delete."
Press
2
Press two number buttons or press CH
for the
3
channel you want to add or delete. For numbers over
100, press the 100 button on the remote control first.
For example : To add channel 7, press 0 then 7 or use CH
For example : To delete channel 121, press the 100 button,
then 2 and 1 or use
.
To ADD the selected channel: Press ❿ button on the
4
remote control.
To DELETE the selected channel: Press ➛ button on
the remote control.
When you have finished, press the MENU button twice.
Note: • A deleted channel can be accessed with the number buttons, but the CH
• To add the LINE input to channel memory, select LINE using the LINE IN button on the remote control,
❿
then press
button on the remote control.
MAIN MENU
Timer recording
Clock set/adjust
❿!Channel setup
VCR function setup
Language/Lengua/Langue
❷ %
❿
]
[
/
]
[MENU/EXIT
CHANNEL SETUP
Ant/Cable:
[CABLE TV]
Auto channel memory
❿ Channel add/delete
[
❷ % !
/
❿
]
[MENU/EXIT
]
CHANNEL ADD/DELETE
❿ Select channel:
[
1]
.
❿
and press [
] to ADD
press [
➛
] to DELETE
➛❿
]
[
❷ % !
/
]
[MENU/EXIT
CHANNEL ADD/DELETE
❿ Select channel:
[121]
(in memory)
and press [
❿
] to ADD
➛
press [
] to DELETE
[
❷ %
/
➛❿
]
[MENU/EXIT
]
buttons skip past it.
13
Advertisement
Table of Contents
