Page 1
Video Cassette Recorder Owner’s Manual VR8360C VR5360C As an ENERGY STAR Partner, Samsung Electronics America, Inc. has determined that this product or product model meets the ENERGY STAR guidelines for energy efficiency...
Safety Instructions This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, This symbol alerts you that important literature concerning operation DO NOT REMOVE COVER (OR and maintenance has been included with this product.
Press to change channels or press to move a cursor up or down on the menu screen. LINE IN Input signal from another VCR or camcorder. (Model VR5360C has only one AUDIO LINE IN jack.) TIMER Indicator Timer Recording is set.
Replace the compartment cover. Rear Panel Use the jacks on the rear panel to connect the VCR to other components and signals, including: VCRs, TVs, stereo equipment, digital video components, antenna and cable signals. Note: VR5360C has one Audio out on the rear panel.
VCR. Plug and Play The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box or DSS ®...
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time. Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 20 minutes, set the time and date manually.
Once the VCR memorizes all the available channels, you can use the CH/TRK MAIN MENU Setting the Source Timer recording ❿Clock set/adjust Before the VCR can memorize available channels, you must set the signal source for your VCR. Channel setup VCR function setup With the VCR on, press the MENU button. Language/Lengua/Langue and ❿...
Audio Output (VR8360C only) The VCR can record a program in stereo. It can also be set to record the Secondary Audio Program (SAP) of any broadcast with second language audio. The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.
Page 9
❿ to set “Auto power off” to 1Hr or 2Hr. Press “Auto power off ” sets the VCR to turn off automatically. Note: VCR will shut off 1 or 2 hours after the last button is pressed. Setting the VCR Output CH Access the VCR Setup menu. Press Output Channel.
Play and Pause/Still • Press the PLAY button on the remote control or on the front of the VCR to play a video. (If Auto play is selected and the video tape has no safety tab, it will begin playing automatically when you insert it in the VCR.)
Press the DISPLAY button again to remove display from the TV screen. Note: In order for display information to be accurate, set up the tape length in the VCR Function Setup first (page 12). Record file information •...
TO CANCEL THE TIMER PROGRAM, select the program you want to cancel in the timer recording list. Press the CLEAR button twice on the remote or EJECT button on the VCR to clear the Timer Program settings. The contents are then cleared.
• Proper ventilation ensures that overheating will not damage electronic circuits. Don’t block ventilation holes. • Take care of your remote control. Keep the remote with your VCR, where it is unlikely to be lost or damaged. • Keep liquids away from your VCR, including beverages and cleaning liquids. Spilling any liquid on the VCR can damage the electronics, resulting in an electric shock or fire.
Page 14
100 seconds Power Source: 120V AC, 60Hz Power Output: VR8360C App. 16 watts on; App. 1.5 watts off VR5360C App. 15 watts on; App. 1.5 watts off Dimensions: 360mm(W) X 94mm(H) X 238mm(D) 14.2''(W) X 3.7''(H) X 9.4''(D) Weight: 2.8kg/6.2lbs...
Page 15
SAMSUNG ELECTRONICS CANADA, INC. HEADQUARTERS SAMSUNG ELECTRONICS CANADA, INC. 7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 CANADA TEL: 1-905-542-3535 www.samsung.ca CUSTOMER SERVICE 7037 Financial Drive Mississauga, Ontario L5N 6R3 Canada 1-800-SAMSUNG (1-800-726-7864) ELECTRONICS Printed in China AC68-01971A(02)