Safety Instructions WARNING: provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR grounding system of the building, as close to the point of cable ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS entry as practical.
(English/Spanish/French) • Rewinds a T-120 in about 100 seconds • Auto Clock Set Your New VCR Accessories Check to make sure the following items have been included with your VCR. Remote Control Batteries for remote(2AA) (AC59-00064G) (AC43-12002J) Front Panel and Display...
Replace the compartment cover. Rear Panel Use the jacks on the rear panel to connect the VCR to other components and signals, including: VCRs, TVs, stereo equipment, digital video components, antenna and cable signals. Note: VR5460 has one Audio out on the rear panel.
VCR. Plug and Play The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box or DSS ®...
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time. Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 7 minutes, set the time and date manually.
Press the MENU button to start the clock. Press the MENU button after setting up the clock. Setting the Channels Once the VCR memorizes all the available channels, you can use the CH/TRK M L buttons to select channels. MAIN MENU Setting the Source Timer recording ❿Clock set/adjust...
Audio Output (VR8460 only) The VCR can record a program in stereo. It can also be set to record the Secondary Audio Program (SAP) of any broadcast with second language audio. The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.
Tape Controls Play and Pause/Still • Press the PLAY button on the remote control or on the front of the VCR to play a video. VCR FUNCTION SETUP (If Auto play is selected and the video tape has no safety tab, it will begin playing automatically...
VCR Operation Key Lock If you do not want others to operate the VCR (for example if you have programmed a timer recording) you can set the VCR to lock out all button controls. Press and hold the DISPLAY button on the remote control for 5 seconds.
To end recording, press the STOP button. Separate Recording and Viewing You can view a different program from the one you’re recording if your VCR is connected to your anten- na or cable system. When using a cable decoder box, use an A/B switch.
• Proper ventilation ensures that overheating will not damage electronic circuits. Don’t block ventilation holes. • Take care of your remote control. Keep the remote with your VCR, where it is unlikely to be lost or damaged. • Keep liquids away from your VCR, including beverages and cleaning liquids. Spilling any liquid on the VCR can damage the electronics, resulting in an electric shock or fire.
• Press EJECT to see if a cassette is already in the VCR. inserted. • Make sure the cassette is window side up, with the arrow facing toward the VCR. • Make sure the VCR is not in Key Lock mode.
Rewind Time: Power Source: Power Output: Dimensions: Weight: Your VCR can receive 68 broadcast TV channels or up to 125 unscrambled cable channels. Check your local cable company for complete compatibility requirements. Specifications UHF/VHF: 75 Ω F type connector Standard NTSC...
Page 15
@ ? @ @ @ @ @ @ @ ? @ @ ? @ ? g @ RAT ON W TH RESPECT TO TH S PRODUCT SHALL BE B ND NG TO SAMSUNG SAMSUNG @ ? g @ ? @...
Page 16
SAMSUNG ELECTRONICS AMERICA, INC. HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J. 07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201, Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) Printed in China AC68-02094A(00)