Setting The Channels - Samsung VR5360C Owner's Manual

VCR Setup
Manually Setting the Clock
1
Press MENU on the remote control. Press
select "Clock set/adjust."
and ❿ on the remote control to select MANUAL.
2 Use
3
The first clock setting display appears.
and press ❿ to
To enter the current time, press or
move to the the next setting.
4
To enter the current month and date, press
press ❿ to move to the next setting.
5 To enter the current year, press or .
The day of the week is automatically added after you set
the year.
6 Press the MENU button to start the clock.
Press the MENU button again when you finish setting
the clock.
8
and ❿ to
MAIN MENU
Timer recording
❿Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
❷ % [ /❿] [MENU/EXIT]
CLOCK SET/ADJUST
AUTO
❿ MANUAL
Select [ ] and press [❿]
❷ ! % !
[ ❷ % /❿] [MENU/EXIT]
CLOCK SET/ADJUST
TIME DATE YEAR
12:00 A 1/01 2003 WED
M
[ ❷ % ! /➛❿] [MENU/EXIT]
or and
CLOCK SET/ADJUST
TIME DATE YEAR
9:00 P 5/05 2003 MON
M
❷ % ! [ /➛❿] [MENU/EXIT]
CLOCK SET/ADJUST
TIME DATE YEAR
9:00 P 5/05 2003 MON
M
❷ % !
[ /➛❿] [MENU/EXIT]
VCR Setup

Setting the Channels

Once the VCR memorizes all the available channels, you can use the CH/TRK
Setting the Source
Before the VCR can memorize available channels, you must set the signal source for your VCR.
1
With the VCR on, press the MENU button.
and ❿ to select "Channel setup."
Press
2 If you have a cable system hooked up to your VCR,
leave CABLE TV displayed in the Ant/Cable screen.
3
If you have an antenna hooked up to your VCR, press
❿ until ANTENNA appears. Press the MENU button
when you have selected the correct signal source.
Memorizing the Channels
1 and ❿ to select
Press the MENU button. Press
"Channel Setup."
2 and ❿ to start Auto channel memory function.
Press
3 Your VCR will begin memorizing all available channels.
To interrupt, press the MENU button on the remote con-
trol. When the channel number on screen stops chang-
ing, the VCR has finished.
Adding or Deleting Memorized Channels
You can add or delete channels that have been memorized with the Automatic Channel Memory function. The Auto
Channel Memory function must be performed before Channel Add/Delete can be used.
1 and ❿ button to select
Press the MENU button. Press
"Channel Setup."
2 and ❿ button to select "Channel Add/Delete."
Press
3
Press two number buttons or press CH/TRK
the channel you want to add or delete. For numbers
over 100, press the 100 button on the remote control
first.
For example : To add channel 7, press 0 then 7.
For example : To delete channel 121, press the 100 button,
then 2 and 1.
4 To ADD the selected channel: Press ❿ button on the
remote control.
To DELETE the selected channel: Press ➛!button on
the remote control.
When you have finished, press the MENU button twice.
Note: • A deleted channel can be accessed with the number buttons, but the CH/TRK
• To add the LINE input to channel memory, select LINE using the INPUT SEL button on the remote
control, then press ❿ button on the remote control.
buttons to select channels.
CHANNEL SETUP
❿ Ant/Cable: [CABLE TV]
Auto channel memory
Channel add/delete
[ ❷ % /❿] [MENU/EXIT]
CHANNEL SETUP
Ant/Cable: [CABLE TV]
❿ Auto channel memory
Channel add/delete
❷ %
[ /❿] [MENU/EXIT]
CHANNEL SETUP
Ant/Cable: [CABLE TV]
Auto channel memory
❿ Channel add/delete
for
[ ❷ % ! /❿] [MENU/EXIT]
CHANNEL ADD/DELETE
❿ Select channel: [ 01]
and press [❿] to ADD
press [➛] to DELETE
[MENU/EXIT ]
[ ❷ % ! /➛❿]
buttons skip past it.
9