Attaching The Canopy - Miele DA 239-3 Operating And Installation Instructions

Attaching the canopy

^ Hang the canopy from the motor as-
sembly by placing the holes at the
rear over the hooks on the lower
edge of the assembly. Be careful not
to pinch any wires.
^ Secure the canopy by guiding the 2
remaining screws through the locking
plate and the holes in the motor as-
sembly (see illustration). Tighten the
screws.
Connecting the exhaust duct
^ Connect the ductwork to the exhaust
connection using appropriate mea-
sures for the type of ductwork being
installed (hose clamp, duct tape,
etc.).
^ Direct the duct through the back wall
or the ceiling.
Installation
31