Attaching The Lightshield; Weight Of A Lightshield Matching Existing Furniture; Adjusting The Building-In Depth - Miele DA 3460 Operating And Installation Instructions

Attaching the lightshield

^ Attach the lightshield (if using).
A DML 400 installation kit, available as
an optional accessory, is required for
this.
Follow the installation instructions
supplied.
Warning: Failure to install the screws or
fixing device in accordance with the
instructions may result in electrical
hazards.
Weight of a lightshield matching
existing furniture
The lightshield must not exceed 1300 g
in weight.
This applies to lightshields with a depth
of up to 30 mm.
For larger or heavier lightshields, the
weight must be reduced, e.g. by
trimming it down at the back.

Adjusting the building-in depth

^ The position of the deflector plate
can be brought forward by up to
35 mm using the adjusting screws on
either side of the canopy.
Then align the deflector plate with the
front of the adjacent furniture units.
Installation
29