4.
Use 3 screws to secure the wheel cover to the
steering wheel.
5.
Torque the 3 screws to 0.6 N∙m (5 in-lb).
2
Charging the Machine
No Parts Required
Procedure
Charge the machine; refer to
Lithium-Ion Battery Charger (page
3
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
1.
Check the brake-fluid level before you first start
the machine; refer to
Level (page
45).
Figure 4
Understanding the
28).
Checking the Brake-Fluid
2.
Check the transaxle-fluid level before you
first start the machine; refer to
Transaxle-Fluid Level (page
3.
Check the air pressure in the tires; refer to
Checking the Tire Pressure (page
4
Burnishing the Brakes
No Parts Required
Procedure
To ensure optimum performance of the brake system,
burnish (break-in) the brakes before use.
1.
Bring the machine up to full speed, apply the
brakes to rapidly stop the machine without
g424447
locking up the tires.
2.
Repeat this procedure 10 times, waiting 1 minute
between stops, to avoid overheating the brakes.
Important:
if the machine is loaded with 227 kg (500 lb).
5
Reading the Manual and
Viewing the Setup Material
Parts needed for this procedure:
1
Operator's Manual
1
Registration card
1
Predelivery Inspection Form
1
Certificate of Quality
2
Key
Procedure
•
Read the Operator's Manual.
•
Fill out the registration card.
•
Complete the Predelivery Inspection Form.
•
Review the Certificate of Quality.
10
Checking the
44).
19).
This procedure is most effective