Table of Contents
Advertisement
Transporting the
Lithium-Ion Batteries
The US Department of Transportation and
international transportation authorities require that
lithium-ion batteries be transported using special
packaging and only be transported by carriers certified
to haul them. In the US, you are allowed to transport
a battery when it is installed on the machine as
battery powered equipment, with some regulatory
requirements. Contact the US Department of
Transportation or the appropriate government body in
your country for detailed regulations on transportation
of your batteries or the machine with the batteries
equipped.
For detailed information on shipping a battery, contact
your authorized Toro distributor.
Understanding the
Lithium-Ion Battery Charger
Connecting to a Power Source
DANGER
Contact with water while charging the
machine could cause electric shock, causing
injury or death.
• Do not handle the plug or the charger with
wet hands or while standing in water.
• Do not charge the batteries in the rain or in
wet conditions.
To reduce the risk of electric shock, this charger has a
3-prong grounded plug (type B). If the plug does not
fit into the wall receptacle, other grounded plug types
are available; contact an authorized Toro distributor.
Do not change the charger or the power-supply-cord
plug in any way.
Important:
Check the power supply cord
periodically for holes or cracks in the insulation.
Do not use a damaged cord. Do not run the cord
through standing water or wet grass.
See
Figure 27
for power source requirements.
Figure 27
1.
Plug the power-supply cord into the machine
charger outlet
WARNING
A damaged charger cord can cause an
electrical shock or a fire.
Thoroughly inspect the power supply
cord before using the charger. If the cord
is damaged, do not operate the charger
until you obtain a replacement.
1. Charger outlet
2.
Insert the wall plug end of the power-supply cord
into a grounded electrical outlet.
decal140-4590
28
(Figure
28).
Figure 28
g424855
Advertisement
Table of Contents
