Connecting Other Equipment To Your Vcr - Samsung SV-2000M Owner's Instructions Manual

00872A SV-2000M/xev-GB4 9/8/56 12:13 PM Page 36
Using the Assemble Edit Function
GB
2
3
4
5
6
6
7
8
36
This function enables you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your VCR.
2 Press the PLAY button ( ) to start playback.
3 When you reach the position from which you wish to start the new
recording, press the P/STILL button ( ).
4
Press the P/STILL button ( ) again as often as necessary to
advance frame by frame, until the exact recording position is
located.
5
While the VCR is in still mode, press the REC button at least one
second to activate the Assemble Edit function.
Result: The Record symbol ( ) flashes on the display.
6
Select the source from which you wish to record by pressing:
the PROG ( or ) buttons for television channels ; or
the INPUT button for the L1 or L2 input sources.
Perform necessary hookups and activate source. Refer to
page 37.
7 Press the P/STILL button ( ) to start recording.
8
When you have finished recording, press STOP ( ).

Connecting Other Equipment to Your VCR

You can connect other audio and/or video equipment to your VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The LINE 2 input connectors on the front of the VCR are used to input
signals from equipment such as camcorders, VCRs or stereo sound
systems.
FRONT OF THE VCR
The EURO AV connector on the rear of the VCR is used for equipment with a
SCART input/output such as a satellite tuner or VCR.
or
REAR OF THE VCR
The RCA AUDIO output connectors on the rear of the VCR are used to
output signals to equipment such as a stereo sound system.
REAR OF THE VCR
GB GB
Camcorder
VCR
Stereo sound system
Satellite tuner
VCR
Stereo sound system
37