Table of Contents
Advertisement
00872A SV-2000M/xev-GB2
9/8/56 12:11 PM
Page 24
Using the Timer Programming Feature
GB
1
TIMER PROGRAMMING
O K
E N D:
M E N U
1/JAN SAT
2 : 3 8
PR DAY S T A R T S T O P
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - -- -
S E T :
D E L E T E
:CLR/RST
M E N U
4
1 5
24
The Timer Programming feature enables you to preset the VCR to
record a program up to one month before it is to be broadcast. Up
to six programs can be preset.
Before presetting a recording, check that the date and
time are correct. If not, refer to page 14. If the clock has
not been set, the Date/Time Setting function is activated
automatically.
1
Insert the cassette and press the MENU button on the remote
control.
Result:
The MAIN menu is displayed.
2
Press
the OK button
to select the timer programming.
3
Select the required channel by pressing the
INPUT to select the, L1 or L2 input sources.
4
Press
to select the recording day.
5
Select the required day by pressing the
or
button.
DLY (daily program).
W-SU, W-MO, .... , W-SA(weekly program).
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
or
8
Press
to select the minutes.
9
Select the required minute value by pressing the
10
Press
to select the recording stop time.
11
Select the required recording stop time by pressing the
button, following the same procedure as when selecting the
recording start time.
12
Press
to select the recording speed.
13
Select the required recording speed value by pressing the
or
button. The default value is SP.
Result:
If you select AUTO mode, the VCR compares the
timer duration with the remaining time on the cassette.
If the tape is not long enough, the speed automatically
changes from SP to LP/SLP.
14
When you have finished, press the MENU button.
Result:
S E T is displayed, indicating that the VCR has been
programmed.
15
Press the VCR STANDBY/ON button to activate the timer.
Checking a Preset Recording
You can check your preset recordings:
when you have finished presetting the VCR ; or
if you have forgotten which programs will be recorded.
1
Press the MENU button on the remote control.
Result:
The MAIN menu is displayed.
2
Press the OK button to select Timer Programming.
Result:
The preset programs are displayed.
3
Press the
or
4
Press the
button to select the PR.
or
button or
5
Press the
or
required.
6
On completion, press the MENU button twice.
button.
Cancelling a Preset Recording
or
button.
You can cancel any program that is:
or
incorrect; or
no longer required.
1
Press the MENU button on the remote control.
Result:
The MAIN menu is displayed.
2
Press the OK button to select Timer Programming.
Result:
The preset programs are displayed.
3
Select the program to be cancelled by pressing the
button.
4
Press the CLR/RST button to cancel the selected program.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
5
On completion, press the MENU button twice.
button to select the required program.
button to select and change any value as
or
GB
TIMER PROGRAMMING
O K
E N D:
M E N U
1/JAN SAT
3 : 3 9
PR DAY S T A R T S T O P
5 SU16 2 2 : 3 0 2 3 : 3 0 SP
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - -- -
S E T :
D E L E T E
:CLR/RST
M E N U
1/JAN SAT
3 : 3 9
PR DAY S T A R T S T O P
5 SU16 2 2 : 3 0 2 3 : 3 0 SP
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - - --
-- ---- - - : - - - - : - -- -
-- ---- - - : - - - - : - -- -
S E T :
D E L E T E
:CLR/RST
M E N U
4
25
- Quick Links:
- Multi-System Vcr
Hide quick links:
Advertisement
Table of Contents
