Advanced Menu Options - Honeywell Home TH6220WF2006 Professional Install Manual

Installer setup – using the Honeywell Home app
Setup using the app
Download the Honeywell Home app from App Store or
Google Play to use a hidden PRO installation feature
that will allow you to configure the thermostat and
personally invite your customer to connect to the
installed thermostat at the same time.
Enter Contractor Mode
To enter Contractor Mode, press and hold the Honeywell Home logo for 5 seconds.
Then tap Confirm to begin using Contractor Mode. Follow steps to personally invite
your customer to connect their Honeywell Home App.
Installer setup – advanced menu
To access the advanced menu, press and hold the Menu button for 5 seconds.
Touch or to go through the options in the advanced menu.

Advanced menu options

Device Setup
This is used to access the device ISU setting.
Screen Lock
The thermostat touch screen can be set to lock
fully or partially.
Rater View
A read only place to view all the ventilation
settings.
System Test
Test the heating and cooling system.
Range Stop (Temperature)
Set the minimum, maximum, cool and heat
temperature set points.
Following Schedule
Mode
Heat
Wake Away Home Sleep
Mode
Reset
Access all reset options on the
thermostat. This is the only place
to access factory reset.
9
AM
Fan
Auto
Menu Fan