Table of Contents
Advertisement
Problem
There is no
power
supply,
even when
an external
battery is
connected
(the
external
power LED
(orange)
does not
light).
The internal
battery
discharges
almost
immediately.
The edges
or corners
of the
image on
the display
screen are
not visible.
36
Check
Does the
external
battery
provide the
current of at
least 1 A?
Is the internal
battery fully
charged?
Does the
internal
battery
discharge very
quickly after it
was fully
charged?
Is the head
display unit
adjusted
correctly?
Action
Use an external
battery that provides
a voltage of 5 V DC
and current of at
least 1 A.
Fully charge the
internal battery
before using it.
The internal battery
has reached the
end of its service
life and must be
replaced. Contact
your Brother dealer
for more
information about
purchasing
a replacement
battery.
Adjust the position
and angle of the
flexible arm and
head display until
you can see the
complete image.
Page
26
-
-
15
Advertisement
Table of Contents
